Help convertign OBD-1 to OBD-II
11-15-2006, 07:51 PM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Cincinnati, OH
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Help convertign OBD-1 to OBD-II I have a 92 Camaro that I put an ls1=t56 combo in...I"m building a turbo now and I am going to need to tune the car using the OBD-II setup from the newer car....I had my wiring harness done at wait4meperformance.com
All wires are run and I have a serial data wire and a check engine light wire just sitting under the dash not hooked to anything...
Can anyone walk me through converting my origional OBD-1 to the newer OBD-II style
I know I will need the actual OBD-II plug but what else will I need.
All wires are run and I have a serial data wire and a check engine light wire just sitting under the dash not hooked to anything...
Can anyone walk me through converting my origional OBD-1 to the newer OBD-II style
I know I will need the actual OBD-II plug but what else will I need.
