ProCharger Parts(Bracket)
11-19-2006, 03:28 PM
#2
TECH Addict
iTrader: (5)
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Try Bob at EPP. You are going to use a P600 on a LS1??!! That is a very small blower and wont be enough at all for a LS1.
I can sell you my D-1SC head unit and Bob will complete the kit for you.
I can sell you my D-1SC head unit and Bob will complete the kit for you.
11-20-2006, 12:19 PM
#7
On The Tree
Join Date: Oct 2005
Location: Boostville
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
There are no brackets for a P600B for a LS1.
So you will have to make your own.
Also, FYI a P600b and a P1SC are the same impeller, and volute.
The only difference is inside the transmissions of the blowers.
One is oil fed,
the other is self contained.
The only reason why they underrate them, is they don't like spinning the P600B's as hard as a P1SC.
But p600b's can make some wicked power, when leaned on.
EA
So you will have to make your own.
Also, FYI a P600b and a P1SC are the same impeller, and volute.
The only difference is inside the transmissions of the blowers.
One is oil fed,
the other is self contained.
The only reason why they underrate them, is they don't like spinning the P600B's as hard as a P1SC.
But p600b's can make some wicked power, when leaned on.
EA
