383 LS1 parts give me advice
11-26-2006, 01:20 AM
#1
Teching In
Thread Starter
Join Date: Feb 2006
Location: El Cajon
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
383 LS1 parts give me advice I am building a 383 LS1. I have narrowed it down to these components.
I would like input for people that have done this and sponsors that want to sell me the parts. I want to buy the Rotating Assembly and heads from the same person so I know that they will work together and have the correct compresson ratio. I need a good cam for street type lots of mid-range.
Lunati LS1/LS6 Rotating Assembly
Stroke (inches) : 4.000"
Rod Length (inches) : 6.125"
Bore Diameter : 3.903"
Compression Ratio : 10.6:1
stage 2 ported 243 heads
Fast 90/90
Cam/valve springs and retainers
I would like input for people that have done this and sponsors that want to sell me the parts. I want to buy the Rotating Assembly and heads from the same person so I know that they will work together and have the correct compresson ratio. I need a good cam for street type lots of mid-range.
Lunati LS1/LS6 Rotating Assembly
Stroke (inches) : 4.000"
Rod Length (inches) : 6.125"
Bore Diameter : 3.903"
Compression Ratio : 10.6:1
stage 2 ported 243 heads
Fast 90/90
Cam/valve springs and retainers
11-26-2006, 01:26 PM
#2
TECH Addict
iTrader: (22)
Join Date: Sep 2004
Location: tennessee
Posts: 2,639
Likes: 0
Received 0 Likes
on
0 Posts
i've not done it but i'd say something in the 23x/23x range on a 112 or 110 with xer lobes should be a decent choice. are you set on the 10:6 scr ? you could probably get away with alittle more scr depending on your cam choice and octane.
11-27-2006, 12:11 AM
#5
Teching In
Thread Starter
Join Date: Feb 2006
Location: El Cajon
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slow trap
i've not done it but i'd say something in the 23x/23x range on a 112 or 110 with xer lobes should be a decent choice. are you set on the 10:6 scr ? you could probably get away with alittle more scr depending on your cam choice and octane.