View Full Version : whats faster, help vette bragger !!!!!!!!!


zrater
11-28-2006, 08:44 PM
my stock 2002 z28 a/4 273 gears or my buddies new 1996 coll vette
lt1 a/4 310 gears he thinks. mine with the lid ran 13.6 @ 105..

Magnet
11-28-2006, 10:25 PM
i would think ti would be close with you pulling a slight edge although i dont know the c4 vettes that well

schtick
11-29-2006, 11:30 AM
Race him and find out. :thumb:

s346k
11-29-2006, 11:39 AM
a4 vette will probably be within a carlength through the 1/8, but you will start to pull between the 1/8 and 1/4.

just be sure to race to 100+ mph to ensure a victory. i raced an m6 lt1 vette when my car was stock (103 trap at the time) and we were dead even to 80 or so, then i started slowly pulling.

you trap 105 and this car is an auto, so the odds appear to be in your favor despite the weight disadvantage. oh, and you have THE ALMIGHTY LS1.

~RedLineLs1~
11-29-2006, 11:49 AM
I ran a bolt-on c4 when I was stock and started to pull on him at 80mph or so. He had about a fender on me from the get go.

vince3
11-29-2006, 10:28 PM
you will win.

Nate_Taufer
11-30-2006, 01:45 AM
by "coll" vette do you mean "Calloway" vette? If so you'll get murdered.

Nate

ls1408cp
11-30-2006, 02:23 AM
I had a stock c4 that ran 13.1 at 107 but it was a six speed

zrater
12-01-2006, 03:29 PM
he does not track race, so it would be scary to do this on the street.
my z is nasty wicked on the street. no this is a collecters vette hes
got. i think i could take him out , but im not shur. his graph in his
owners manuel shows 310 and 330 hp, mine dynoed on a dyno at 309
and 328 ftlbs. his is on paper thats what im trying to tell him that
its on paper. i told him it would be to close to evan worry about it.
i think traction could be a issue for my z , it burns a long ways right
now. but spring time ill have new rubber. ill have to try. i just dont
want to get wipped by a lt1 motor, it cant happen.... :bang:

J'sRedWS6
12-01-2006, 04:39 PM
309rwhp is damn good for a stock Auto