WTT-My 94'z for modded M6 LS1
12-01-2006, 01:24 PM
#1
TECH Addict
Thread Starter
iTrader: (15)
Join Date: Jun 2002
Location: IL
Posts: 2,642
Likes: 0
Received 0 Likes
on
0 Posts
WTT-My built 94'z a Harley Davidson Been thinking of swapping my 94'z for a clean, mid-low miles,low mileage Harley Softail/Chopper style. Here's the basics..
94' z28-
-Nu-Tek 383 assembled rotating assembly in 02'(i think). Consists of forged Eagle H-beam rods(6"),Scat cast crank, forged flat top JE pistons.
-Heads are LT1 casting, ported by JDM Engineering out of Minier,IL.(have flow #'s).Billingsley Racing assembled heads/motor. Ferrea 2.00/1.56 valves,CC 918 beehive springs.(springs/seats/cam are only 2yrs old).
Cam is a billet, Bret Bauer custom grind 242/.6xx-108 lsa, sounds badass
CC lifters, Trick Flow chromoly pushrods, SVO 42# green top injectors.
-LTx version of LT1 intake by Jordan Musser(ported/welded above injector bosses) 58mm Holley TB, Vortech elbow, KN cold air kit.
Dynatech LT's , into a 3" ORY, 3" QTP electric cutout, Hooker catback with SLP slash cut stainless tips.
-Trans is a HD rebuilt with Transgo Shift kit, Fuddle Racing 3800/2.1 stall, w/a big cooler.
-Strange Engineering S60 rear w/35 spline axles, 4:10 gears, Tru-Trac posi, black aluminum cover w/S on it(Bought from Billingsley Racing in March and installed by Billingsley Racing/Strange Engineering)
-Paint is House of Kolor pearls, Medium Teal w/black hardtop.
-Convo Pro wheels,bought last year with M/T Drag Radial rubber(15x4-15x8.5)
Dont have any dyno #'s/track #'s, but should be capable of mid 11's@120'is mph. Tuned by Tim@ Redline Performance.
Serious people PM me. Can email pics if serious.
Lookin' for a Harley Davidson Softail Nightrain, or something custom in awesome condition..Anybody?
94' z28-
-Nu-Tek 383 assembled rotating assembly in 02'(i think). Consists of forged Eagle H-beam rods(6"),Scat cast crank, forged flat top JE pistons.
-Heads are LT1 casting, ported by JDM Engineering out of Minier,IL.(have flow #'s).Billingsley Racing assembled heads/motor. Ferrea 2.00/1.56 valves,CC 918 beehive springs.(springs/seats/cam are only 2yrs old).
Cam is a billet, Bret Bauer custom grind 242/.6xx-108 lsa, sounds badass
CC lifters, Trick Flow chromoly pushrods, SVO 42# green top injectors.
-LTx version of LT1 intake by Jordan Musser(ported/welded above injector bosses) 58mm Holley TB, Vortech elbow, KN cold air kit.
Dynatech LT's , into a 3" ORY, 3" QTP electric cutout, Hooker catback with SLP slash cut stainless tips.
-Trans is a HD rebuilt with Transgo Shift kit, Fuddle Racing 3800/2.1 stall, w/a big cooler.
-Strange Engineering S60 rear w/35 spline axles, 4:10 gears, Tru-Trac posi, black aluminum cover w/S on it(Bought from Billingsley Racing in March and installed by Billingsley Racing/Strange Engineering)
-Paint is House of Kolor pearls, Medium Teal w/black hardtop.
-Convo Pro wheels,bought last year with M/T Drag Radial rubber(15x4-15x8.5)
Dont have any dyno #'s/track #'s, but should be capable of mid 11's@120'is mph. Tuned by Tim@ Redline Performance.
Serious people PM me. Can email pics if serious.
Lookin' for a Harley Davidson Softail Nightrain, or something custom in awesome condition..Anybody?
Last edited by flyinZ; 12-05-2006 at 06:09 PM.
