Is there an aftermarket A4 Shifter for our LS1
12-06-2006, 08:01 PM
#2
10 Second Club
iTrader: (21)
Join Date: Nov 2001
Location: Olive Branch MS/Memphis
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Simple answer... NO. There are tons of threads where people have modified ratchet shifters to fit in F-body consoles. Some guys have used a 6-speed console and boot. I have considered doing this myself. I have attached a picture that I found on this board. I don't know who's car this is... Maybe some of the guys that have done it will post up.
12-07-2006, 07:35 AM
#4
10 Second Club
iTrader: (21)
Join Date: Nov 2001
Location: Olive Branch MS/Memphis
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stripes1987
actually b+m is comming out with one i believe by the beggining of january there was another thread about it on the site but if i find it i will post a link
Trending Topics
12-07-2006, 10:46 AM
#8
TECH Enthusiast
iTrader: (5)
Join Date: Oct 2006
Location: Virginia
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hugger
Simple answer... NO. There are tons of threads where people have modified ratchet shifters to fit in F-body consoles. Some guys have used a 6-speed console and boot. I have considered doing this myself. I have attached a picture that I found on this board. I don't know who's car this is... Maybe some of the guys that have done it will post up.
12-11-2006, 06:06 PM
#11
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
subscribing. TCI makes a bad azz shifter that has grip like handle with a button on the top to use for a transbrake or nitrous.
that would be sweet if it can fit in there without much modification.
that would be sweet if it can fit in there without much modification.
12-12-2006, 01:01 AM
#14
has anyone ever lowered their handle? If you use a dremel you can cut the notches for teh staple to hold the shifter lower on the shaft, and as long as you keep the same distance between the staple cuts and the top of the shaft and the white plastic rod, you can do it right? I've been thinkin about this for years. Has anyone done it?
12-18-2006, 06:05 PM
#20
Originally Posted by -Freak-
^^ thats pretty sweet, I'd buy one in a heartbeat.
So, I now am settling for this shifter ****.
Last edited by Jeff 97 Formula; 12-18-2006 at 06:15 PM.