Input needed....cam with springs
12-09-2006, 06:48 PM
#3
Launching!
iTrader: (10)
Join Date: Jun 2005
Location: Rochester, NY
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
I am running a TR224 and put on some comp 918's. Worked out great! Not sure on the specs of the ls6 springs, but I would imagine they are not as good as the comp's.
12-09-2006, 11:34 PM
#4
TECH Fanatic
iTrader: (2)
Join Date: Nov 2006
Location: Aztec, NM
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
How much lift is your cam? Just courious, needed info for the proper spring pressure.
The ls6 spring has 90 lbs @ 1.8" for the seat 280 lbs @ 1.2" for the open pressure.
The 918 spring has 130 lbs @ 1.8" for the seat 333 lbs @ 1.15" for the open pressure.
Also do you have the hollow stem valves from the 02'-04' Z06?
The ls6 spring has 90 lbs @ 1.8" for the seat 280 lbs @ 1.2" for the open pressure.
The 918 spring has 130 lbs @ 1.8" for the seat 333 lbs @ 1.15" for the open pressure.
Also do you have the hollow stem valves from the 02'-04' Z06?