free mods for 3.8
12-14-2006, 08:28 PM
#1
Teching In
Thread Starter
Join Date: Dec 2005
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
free mods for 3.8 Raced a 94 mustang gt today and was dead even the whole way. He wants a rematch on Monday so I was wondering if there were any free mods for the v6 so were not even the whole way. I searched, but only found the mods for the v8 (i guess nobody cares about v6s?)
12-14-2006, 08:41 PM
#2
On The Tree
Join Date: Jul 2006
Location: Kimberly, WI
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
This is more of a LSx site so theres not alot of v6 stuff, but go check out www.fullthrottlev6.com theres a ton of info there.
12-15-2006, 08:20 AM
#3
Originally Posted by AllShowNoGo
This is more of a LSx site so theres not alot of v6 stuff, but go check out www.fullthrottlev6.com theres a ton of info there.
12-15-2006, 12:56 PM
#4
There's plenty of free mods. There should be a FAQ in the f-body section on fullthrottleV6. It won't be earthshattering, but it will be a noticable improvement on some of the free mods.
I'd say get a whisper lid instead of doing the shaved airlid mod though. Just my two-cents worth...
I'd say get a whisper lid instead of doing the shaved airlid mod though. Just my two-cents worth...
12-16-2006, 01:49 AM
#7
TECH Addict
iTrader: (6)
Join Date: Oct 2004
Location: Gulf Coast
Posts: 2,264
Likes: 0
Received 0 Likes
on
0 Posts
that 5.0 has a lot more TQ than your V6. sounds like the car, or driver, has some pretty big problems if a V6 firebird is even with it...
that is, unless you only raced till about 40-50mph....
that is, unless you only raced till about 40-50mph....
Trending Topics
12-16-2006, 06:30 AM
#8
TECH Senior Member
iTrader: (3)
Join Date: Oct 2006
Location: Decatur, TN (N-W of Athens)
Posts: 7,564
Likes: 0
Received 3 Likes
on
3 Posts
Throttle Body Coolant Bypass (if it's doable on the V6), K&N or Cold Air with K&N (not necessarily K&N's $200 CAI, but just one with their cone filter). That B&M Trans Shifter adapter should help, assuming you have a 4L60E in yours. If you have the 5spd then nevermind that mod. To nay-sayers, it's only $35, and a little shift firmness only helps.
