Revelation Z28

iTrader: (10)

it seens like the hood wont sit flush with the front bumper. ive moved the bump stops down on the front end and it still wont stay flush. its 1/4" or a little less than that higher than the bumper. is there anything else i can do to line them up?

JSmee99T/A

iTrader: (15)

Smaller stops, Check to see if its hitting anywhere, Maybe you can move the latch system too, I dont know on the camaros though.

KissMyWhiteSS

iTrader: (3)

I have the same problem...it's a PITA.

transambandit

iTrader: (6)

did you put on a new hood? sometimes you need to adjust the hinge with a dremel to pull the hood down some, when i put on my ws6 hood i had to do it.

Revelation Z28

iTrader: (10)

i dont know whats up with it, the front bumper is in place and when i pull it up it doesnt move much, so its gotta be the hood.

you can unbolt the hood hinge and tap it down a couple mm right?

Revelation Z28

iTrader: (10)

ttt...

BirdmanLS1

iTrader: (3)

ya thats the only thing im worried about, when getting a new hood. Im afriad it wont be flush. Good luck finding out how to fix it. I would be interested to see how u do it.

mycamaroSS

iTrader: (4)

yea dude mine does the samething and what does PITA mean