injector, fuel sys. suggestions
12-17-2006, 10:02 PM
#1
Teching In
Thread Starter
Join Date: Dec 2006
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
injector, fuel sys. suggestions trying to help my buddy pick out fuel sys upgrades...
It's a stock block, with forged internals
LS6 heads
Flowtech LT headers
Texas Speed torquer v.2 cam and supporting hardware
ported/polished/no honeycomb intake
pre-tuned PCM from Texas-Speed as well
I read a lot on the Racetronix kit, and I think that will work. As far as injectors go, I don't even know where to start. I keep telling him he needs to upgrade his fuel sys before he gains anymore HP or he could really regret it. I may be wrong, who knows. Anyhow, suggestions for injectors and whether or not an aftermarket regulator should be considered would be great. Thanks for the help.
It's a stock block, with forged internals
LS6 heads
Flowtech LT headers
Texas Speed torquer v.2 cam and supporting hardware
ported/polished/no honeycomb intake
pre-tuned PCM from Texas-Speed as well
I read a lot on the Racetronix kit, and I think that will work. As far as injectors go, I don't even know where to start. I keep telling him he needs to upgrade his fuel sys before he gains anymore HP or he could really regret it. I may be wrong, who knows. Anyhow, suggestions for injectors and whether or not an aftermarket regulator should be considered would be great. Thanks for the help.
12-18-2006, 08:30 AM
#2
12-20-2006, 01:45 AM
#5
Originally Posted by 93RTTT
trying to help my buddy pick out fuel sys upgrades...
It's a stock block, with forged internals
LS6 heads
Flowtech LT headers
Texas Speed torquer v.2 cam and supporting hardware
ported/polished/no honeycomb intake
pre-tuned PCM from Texas-Speed as well
I read a lot on the Racetronix kit, and I think that will work. As far as injectors go, I don't even know where to start. I keep telling him he needs to upgrade his fuel sys before he gains anymore HP or he could really regret it. I may be wrong, who knows. Anyhow, suggestions for injectors and whether or not an aftermarket regulator should be considered would be great. Thanks for the help.
It's a stock block, with forged internals
LS6 heads
Flowtech LT headers
Texas Speed torquer v.2 cam and supporting hardware
ported/polished/no honeycomb intake
pre-tuned PCM from Texas-Speed as well
I read a lot on the Racetronix kit, and I think that will work. As far as injectors go, I don't even know where to start. I keep telling him he needs to upgrade his fuel sys before he gains anymore HP or he could really regret it. I may be wrong, who knows. Anyhow, suggestions for injectors and whether or not an aftermarket regulator should be considered would be great. Thanks for the help.
__________________
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<