Gears & Axles - Strange 12 bolt owners w/i

Just wondering if y'alls 12 bolts are doing anything similar to what mine is doing.

Apart from other problems I have for the most part ironed out, the rear end is making a 'clunking' noise when I put it in reverse or sometimes starting out in first gear. I mainly notice it when the car has been sitting for a while and I back out of a parking spot. It's just a single clunk like the posi is locking or something. It also seems like it might be the driveshaft moving a bit...dunno.

I checked the d/s to see if there was any play...didnt seem to be. Really seems to be coming from the pumpkin. Ive got some whine in the rear...but nothing too bad, and I expected some with a heavy duty rear. The rear has only had about 3 or 4 hard launches on it since I put it in back in February. I have noticed that occasionally only one tire spins when Im hammering it on the street around corners mainly. If I purposely do a burnoff in a straight line, I dont think Ive ever had just one wheel spin. Both wheels currently spin when I spin one of them while its up on jackstands...so...the posi doesnt seem to be shot.

Any opinions/similar experiences welcome...

I haven't noticed any clunking noises in mine.It is not good to do burnouts arounds corners though.That will burn the posi out quickly.

Well... I dont intentionally do burnouts around corners, I just like to carve em...and come out fast...and with 380 at the rear...well...you know... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

ouch, I was not aware that sharply rounding corners would burn the posi out <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />

I'll bet it is an installation problem. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Umm....you can go to hell beotch!

<img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by WS6Modder:
<strong>Well... I dont intentionally do burnouts around corners, I just like to carve em...and come out fast...and with 380 at the rear...well...you know... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I do the same thing,just saying it's not good <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> You could also check the lower control arms,torque arm ect. to make sure the bolts are really tight.