TLKSCHP

I need to order a set of pushrods today so i can sneak my new heads on while the wife is away for the day next week. I know I should probably measure and go that route but surly enough people have done similar swaps that their should be a good guess. I don't want her to know I'm working on my car again, she would kill me.


I have a Comp. 224/228 581/588 112 with a set of Patriot Performance stage 2 heads that have been milled .010 perimeter style since this is on a 98 C5. I'm thinking the 7.4 stock length should be fine. What do you guys think?

Thanks again

NastySSoo

I agree with you!

Paul

Blacker

iTrader: (3)

There are a few things that go into finding the correct pushrod length.

New Cam Base Circle
Head Gasket Thickness
Cylinder Head Milling

With your specs, a 7.404" PR would be ideal. So, the 7.400" will work fine.

bjamick

iTrader: (31)

Stock length FTW and dont get caught so make sure and get some lava soap to clean all the grease under your nails and off your hands...

TLKSCHP

Thanks for the help, i have a set on the way. Comps for $82 and free shipping. my hands are always dirty looking so i don't have to worry about that.