justatool

iTrader: (1)

i have received a 2001 transam its has long tube headers with a Y pipe but the rear 2 O2 sensor are missind causing the check engine light to come on. i know if i tap the y pipe and install the o2 back in. it still will light up the check engine light because no cats correct and to much flow. how do i fix this? one more this the car has a K&N intake system and the exchaust will a programmer help? sorry to sound stupid but i sold my 500hp Rx7 and went back to american cars just something about V8s that sound so good. i bought the car this way, and the kid said it didn't need a programmer its all hype, kinda hard for me to beleave. what do u guys think? thanks

WS6nJAX

iTrader: (207)

your headers should have a bung for the front sensors and you will need a pair of simulators for the rear. or you could have a tuner delete them.

justatool

iTrader: (1)

any tuner?

pist0lpete

iTrader: (3)

when he says tuner he means either buy something like efilive or Hptuners or have a shop who tunes ls1's do it for you.

justatool

iTrader: (1)

ok i see i thought a programmer sorry

pist0lpete

iTrader: (3)

One of the programmers out there might delete rear 02s but I am not familliar as they are pretty much worthless. For the same price you can buy a tuning suite like hptuners or efilive that does about ten times more things.

justatool

iTrader: (1)

thats awsome to hear i will check into that

mvvette97

iTrader: (18)

I have O2 sims for sale if you decide to go that route

justatool

iTrader: (1)

send pics to reamia@comcast.net

justatool

iTrader: (1)

yes intrested

99blancoSS

iTrader: (115)

Sims are an easy way to go if you dont know anyone with the proper software. Sounds like you have an ory. As stated above you have front o2 sensors and rear sensors. You need the fronts and they should be ok. They'll have an extension on the harness. The rear's either get deleted or get the simms for them. Then just have the code cleared and you should be good to go.

mvvette97

iTrader: (18)

give me a couple min to take some pics and then i will send then to ya

mvvette97

iTrader: (18)

I sent you an email

justatool

iTrader: (1)

payments sent, thanks guys this is a great forum, when i had my rx7 and i was on the forum for 7s, you ask a question and you had to answer 3-4 questions before you would get an answer about what your asking about. i was going to sell this car until i drove it yesterday and holy **** was i amazed, now i know why everyone loves LS1's. are there any more mods i can do before i have to go in the motor? how much more can i sqeeze out of this motor hp rating with just bolts on and how fast are these cars in the 1/4 mile with bolt ons? Thanks

Fratsit

iTrader: (1)

Oh man.... Brother... the sky is the limit with these cars.

If you dont already have a lid I would get one of those... maybe an UD pulley.... we can all go on forever with the types of bolt-ons before you even begin to delve into the engine. Head over to the Exernal Engine forum for all the "bolt-on" mod info you would ever need. The Search button is great to pinpoint specific info.

Hit up the sponsors to the right>>>>>>>>>>>>>>

My personal favorites are Texas Speed and Performance, Thunder Racing, Speedinc, and Greenlight Motorsports, however, ALL the sponsors are fantstic people to do business with.

R/

Frat

PS; Welcome to LS1TECH

justatool

iTrader: (1)

mod list on this car as of yesterday when i put it on a lift:

long tube headers

Y pipe no cats

ud pulley

K&N itake

dont know the brand but the rear of the car has red lower control arms diff cover and a red bar going left to right across the rear end

short throw shifter

what else is there as well as how fast r these cars in the 1/4 mile with bolt ons

mvvette97

iTrader: (18)

I'll ship them out as soon as the postal service is open again.I imagine it will be Tuesday, thanks

KurtRardin

iTrader: (11)

my vinci tuner killed my SES after headers.

justatool

iTrader: (1)

???????