y2k's on a fbody
12-24-2006, 01:13 PM
#1
Teching In
Thread Starter
Join Date: Nov 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
y2k's on a fbody I am thinking about picking up a set of y2k's from a buddy of mine that just purchased a vette. Just wondering what problems, if any, I am going to run into fitting these on my 94 camaro. its a v6 yes i know.. but i use it as a dd and i just want it to look nice. anyways.. i would like to know of the difficulty i will run into.
thanks
thanks
12-26-2006, 01:06 PM
#3
On The Tree
Join Date: Mar 2004
Location: Maine
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
I had the y2k's on my 94 for a little and they are on my 01 and look awesome. In the rear I had to put in some 3/8" spacers and hit the inner fender in 2 spots with a hammer.
The only reason I needed to add the spacers was after hammer clearing I still had an issue with the rearend shifting with 2 people in the car when I went totally sideways in like 2nd gear....otherwise spacers might not be needed just the hammer.
The only reason I needed to add the spacers was after hammer clearing I still had an issue with the rearend shifting with 2 people in the car when I went totally sideways in like 2nd gear....otherwise spacers might not be needed just the hammer.
