View Full Version : Vengeance Racing / Trickflow 505rwhp!!


Brad02Z06
12-29-2006, 07:02 PM
My 02 z06 made 505rwhp and 443 rwtq on stock shortblock!!!

Mods are Trickflow heads, cam, Vengeance Ported Fast, ls2 TB, 1 7/8 kooks longtubes, off road x-pipe, borla cat-back, underdrive pulley, 30lb injectors ,harland rockers.

I go pick the car up tomorrow I will post the graph!!

Brad

Firehawk441
12-29-2006, 07:13 PM
Congrats! Nice job from Vengeance.

Bader-X
12-29-2006, 07:42 PM
congrats! good heads .... 30 lb injectors enough?

Ron@Vengeance
12-29-2006, 07:53 PM
Congrats Brad!!!! We were shooting for the magical 500rwhp... Wasnt sure what to expect, but damn these Trickflows and Mikes tuning pulled it out again!!!

Give me a call once you pick up the car man.

JRracing
12-30-2006, 12:22 AM
Prop to Ron and the guys there. Did it once again.

jeffstar
12-30-2006, 12:39 AM
I'm hoping my setup can produce around 500, but I'd take 475+.

I've got my wideband installed and ready to rock and roll. I SHOULD dyno this weekend but it may need to wait for an open hour/tune slot for next weekend.

Congrats on your numbers, i've got my fingers crossed that my setup (mocked up after the Vengence and ECS combos) will make the same numbers

pdd
12-30-2006, 01:30 AM
what size cam, stock gears?-congrats :)

Sigforty
12-30-2006, 02:14 AM
what size cam, stock gears?-congrats :)

He is running stock gears from what I gather, and I think Ron at Vengence is using a 239 / 242 cam with around .600 lift.

SLP4CamaroSS
12-30-2006, 02:44 AM
he is using a ms3 i checked http://forums.corvetteforum.com/showthread.php?t=1518306&highlight=Vengeance

NOS USER
12-30-2006, 03:25 AM
:headbang:

c5_ls1_6spd
12-30-2006, 03:30 AM
more importantly, TRACK TIMES & SLIPS. we are all waiting.

Brad02Z06
12-30-2006, 07:10 AM
Track times will come.. I got the slicks and skinny's mounted up today!!

The only thing thats going to hurt me is I'm running stock 3.42 gears. If I can run a 6.9XX @ 100 plus I will be happy.

bad95killer
12-30-2006, 07:28 AM
Congrats man & again Vengeance Racing crew proved that 500rwhp+ wasn't a coincidence :devil: :devil:

looking forward to see the graph !!!

peace

Hardtop
12-30-2006, 08:29 AM
Track times will come.. I got the slicks and skinny's mounted up today!!

The only thing thats going to hurt me is I'm running stock 3.42 gears. If I can run a 6.9XX @ 100 plus I will be happy.

Congrats, nice setup. I don't think the stock gears will hurt you with the torque you are making. I have 3.90's in my bolt on car, and wish I had 3.42's. 1st gear is pretty much useless on street tires. I think you will run quicker than 6.9's with no problem. Vengence and TFS seem to be a pretty stout combo. :cheers:

Bruce

02ZOh6
12-30-2006, 01:40 PM
more importantly, TRACK TIMES & SLIPS. we are all waiting.

Yes indeed.

SSilverSSurfer
12-30-2006, 01:41 PM
are these the TFS 215's?

30th t/a
12-30-2006, 01:54 PM
this is just getting crazy. I remember when 450rwhp was big thats average now days, or soon to be. congratulations on the big numbers. now lets see some track numbers :drive:

HUNTER02SS
12-30-2006, 02:05 PM
I can vouch for how the car sound's. It is "BADAZZZ". I was there picking up my part's when he came and picked up his car.The car is awesome. :drive:

Sigforty
12-30-2006, 05:52 PM
he is using a ms3 i checked http://forums.corvetteforum.com/showthread.php?t=1518306&highlight=Vengeance

Ah, Well that would make the cam a 233 237 I think that is what the MS3 is. I thought he swapped out to a Vengeance cam.

Brad02Z06
12-30-2006, 09:02 PM
Here is the graph!! The car drives awesome!

http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=38855190&imageID=1639695947

Sigforty
12-30-2006, 09:13 PM
Here is the graph!! The car drives awesome!

http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=38855190&imageID=1639695947


Private profile so I cannot see it.

Brad02Z06
12-30-2006, 09:21 PM
i changed it.. I have a bigger graph that I could e-mail somebody to post here. My paint shop pro took a shit and want let me resize the picture small enough to post here.

NeverT00fast
12-30-2006, 10:06 PM
Here is the graph!! The car drives awesome!

http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=38855190&imageID=1639695947

Awesome!

Are you still using the MS3 cam? Were the heads milled? Which head gaskets? What length pushrods did they use on the car? Flycut?

cws T/A
12-31-2006, 01:44 AM
and 443 rwtq


Never seen the MS3 produce torque numbers like that .

What does it do on the sauce :twisted:

Brad02Z06
12-31-2006, 10:53 AM
I don't have a MS3 anymore.. I got a Vengeance custom cam.. Driveability is much better than before!!! :)

NeverT00fast
12-31-2006, 10:55 AM
I don't have a MS3 anymore.. I got a Vengeance custom cam.. Driveability is much better than before!!! :)

What's the ballpark cam spec if you don't mind me asking, and did they have to flycut?

bad95killer
12-31-2006, 11:06 AM
Powerful setup buddy esp. the torque side :devil:

i changed it.. I have a bigger graph that I could e-mail somebody to post here. My paint shop pro took a shit and want let me resize the picture small enough to post here.

send it to me & i'll post it :)

slp_firehawk2004@yahoo.com

peace

Brad02Z06
12-31-2006, 11:24 AM
no flycutting... I tell you that it close to the ms3 but not the same an on a 113 lsa

bad95killer
01-01-2007, 10:42 AM
This is much better ;)

http://img.photobucket.com/albums/v229/Bad95killer/Dyno%20Graph/BradZ06dynograph.jpg

peace

TigerWoodsJr
01-01-2007, 03:03 PM
thats awesome brad, good looking graph.

Yeah... you guys are waiting for track times... have you seen brad drive? he is a ninja, lol.

02ZOh6
01-01-2007, 03:45 PM
thats awesome brad, good looking graph.

Yeah... you guys are waiting for track times... have you seen brad drive? he is a ninja, lol.

Most guys are looking for the trap speed. Looking for something in the upper 120 range at that power level. I think he only runs 1/8ths though???

KAOS
01-01-2007, 06:34 PM
looks like it flattened out at 6k, it was climbing then just went flat. bet there is still some left in it somewhere. awesome by the way

CraZee ZO6
01-02-2007, 03:31 PM
Awesome results bro!

I should have #s with my custom cam and trickflow head setup in my zo6 soon...

98camaroLS1M6
01-02-2007, 04:57 PM
Strong, nice setup!

Smokinstorm
01-04-2007, 07:09 PM
Those heads are obviously a major part of this package. Amazing heads/cam package for sure. I can't help but wonder though, how strong this engine would be on the stock heads/cam only. Surely it would be well over 400 as I can't see the heads adding a hundred horsepower to the package. Anybody at Vengeance have a guess at this? I've got my reasons for wanting to know about this. Thanks.

Brad02Z06
01-04-2007, 07:12 PM
It made 465rwhp and 416 rwtq on stock 243 heads.. Mods were cam, ported fast, ls2 tb, full exhaust

Smokinstorm
01-04-2007, 07:28 PM
Thanks for that info. That's obviously a well chosen cam. After reading this thread and also the other one, I've made a deal with Vengeance to try to help out my car. I love this site for doing research. :)

Ryne @ CMS
01-04-2007, 09:21 PM
just curious what was the correction factor on those pulls??

jeffstar
01-05-2007, 09:11 AM
Are these Vengence cars all Speed Density? Just curious, seems like they would be. Congrats on the numbers. I'm hoping I can get close to that with my TFS heads/cam setup but I'm doing my own tune so I don't know if I'll be able too.

BlackScreaminMachine
01-05-2007, 09:43 AM
TFS's are pretty bad ass, matched to a decently sized cam. WHen I am looking at cyl heads TFS are 1# on the list.