Trex and Edelbrock Terminator heads...
#1
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: San Antonio, Texas
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
Trex and Edelbrock Terminator heads...
I am thinking about swapping my ported 98 heads for a set of Edelbrock Terminator Heads which seem to be making very good power. Just wondering if these heads would go good with a Trex and what kind of numbers should I expect? I would think very close to 500rwhp if not more with a 90/90 setup which is on the way. Also plan to spray the car as well and would hope for 750rwhp + with a 250 shot on top of this setup.
#3
TECH Apprentice
Thread Starter
Join Date: Jan 2004
Location: San Antonio, Texas
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
what would be a good set o fheads for a max effort 347 ls1. afr 205s? I saw a memeber on here with a ms3 and terminator heads that made 490rwhp. teh Trex is on slightly bigger than the ms3, so why would the heads be too small?
#4
TECH Apprentice
iTrader: (1)
Join Date: Jan 2005
Location: Big Terrible Texas
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
The edelbrock heads would do pretty good i would think. With such a small runner it should pick up pretty decent power under the curve as well as having a bunch of peak power.