S78/80/88 etc.. guys: What size is the oil inlet?
01-14-2007, 05:11 PM
#1
Teching In
Thread Starter
Join Date: Oct 2005
Location: Miami, Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
S78/80/88 etc.. guys: What size is the oil inlet? The threads in the center section itself, what are they?
If you'll throw in what size feed and drain you're using and any retrictors, that'd be nice to know as well. I'm planning on a -12 drain and an unrestricted -3 feed., although i might use a -4 since i have that stuff laying around.
Thanks!
If you'll throw in what size feed and drain you're using and any retrictors, that'd be nice to know as well. I'm planning on a -12 drain and an unrestricted -3 feed., although i might use a -4 since i have that stuff laying around.
Thanks!
01-15-2007, 02:10 PM
#3
Teching In
Thread Starter
Join Date: Oct 2005
Location: Miami, Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hellbents10
Its either a 1/8 or 1/4 NPT. I used a -3 unrestricted and a -12 return on the S78 I did.
