MySickCamarodotCom

i just wanted and idea of how the Fast Fuel Rails look on the Fast LSx intake... any and all welcome... thanks

00454sscamaro

here ya go


not the best picture, maybe ill take a few more tomarow.

cakweems

iTrader: (25)

That's a nice looking setup.

00454sscamaro

thanks


here's another pic i found, you can see the rails alil better-

MySickCamarodotCom

sweet. thats exactly what im looking for... ive ordered my fuel rails, but where did u get ur braided lines and the fittings from?

00454sscamaro

got it from speed inc.great kit for the price.

kit includes- 1- ls1-#6 rail adapter fitting
1-3' braided line#6
3-#8-#6 adapters
3-#6 90* hose ends
1-#6 straight hose end (dont think i got this in my kit, unless it was the quick connect fitting they sent me to connect to the factory hardline, but i think thats the "adapter" in the parts list...)
1-#8an plug

but it didnt include everything i needed, it was one fitting short, i got local aeroquip place( i think)... a 120* 6an fitting i beleive.(used that one on the inlet of the fuel rail) and the other 90 on the other end of the braided hose.

if you do get this kit let me warn you the line is alil tricky to get the braided hose into the fittings...

a good way to make it easier is to pull the hose from both sides, and wrap electric tap where you want to cut it, then still holding the hose tight cut it in the middle of the tape with the thinest cut off wheel you can find. leave one layer of the tape then wipe a little grease on it with your finger ... then push it in.. hold it in while tightening, that method worked great for me.

Jake@EPP

The top 3 are the aeromotive rails, but really the only difference i see are the mounting tabs (fast are billet), and the FAST includes fittings to run -8 into the back and -6 out the front. While the aeromotive comes with none.

If you need any others just let me know.

00454sscamaro

where are those lines coming out of the front of the rails routed to?

ss1

iTrader: (32)

They go to the regulator and then return back to the tank.

SIC LSX

iTrader: (10)

look here! We did a good job on this car! look at both pages!!
https://ls1tech.com/forums/generation-iii-external-engine/593472-new-goodies-my-400whp-35th-le.html

slt200mph

iTrader: (42)