Will prc springs work in trickflow heads?
01-22-2007, 06:12 AM
#1
11 Second Club
Thread Starter
iTrader: (45)
Join Date: Jan 2003
Location: penna.
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Will prc springs work in trickflow heads? I'm looking at getting the new tfs 215 heads, but the factory springs are good only for .600 lift. The prc .650 springs are the same installed height at 1.800. Will they work?
01-22-2007, 06:27 AM
#2
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
They should drop right in. I would give TEA a call to make sure tho, they might be able to work something out and get them to you with the spring of your choice.
01-22-2007, 12:48 PM
#3
Launching!
Join Date: Feb 2006
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ss2000
I'm looking at getting the new tfs 215 heads, but the factory springs are good only for .600 lift. The prc .650 springs are the same installed height at 1.800. Will they work?
I'd check those springs again. I have them, and my springs were rated to .660, and were the standard duals.
