Slave Cylinder
#1
Launching!
Thread Starter
Join Date: Jan 2007
Location: Delaware, OH
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Slave Cylinder
Just traded my 00 Silverado for a 98 formula M6. The car has been decently modded with a .226 lift .591 duration custom cam, suspension upgrades, MAFless tune, and a few other upgrades. When I got it I was told the slave cylinder has a leak. It does leak and I'm looking to upgrade. I'm planning on upgrading the clutch and possibly the rear end.
Any suggestions on a good upgraded slave cylinder at a good price ($150 or less). I am doing the install so all I need is the part.
Any suggestions on a good upgraded slave cylinder at a good price ($150 or less). I am doing the install so all I need is the part.
#3
Launching!
Thread Starter
Join Date: Jan 2007
Location: Delaware, OH
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
I may just get a stock replacement. the cam in it is a 226/226 .591/.591 113+3 cam. The guy that had the car before me had it custom ground. It's been professionally tuned. It's putting out around 380 RWHP with the other mods in the engine.
#4
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thecorrectformula
I may just get a stock replacement. the cam in it is a 226/226 .591/.591 113+3 cam. The guy that had the car before me had it custom ground. It's been professionally tuned. It's putting out around 380 RWHP with the other mods in the engine.