post up your LED pics.
Trending Topics
02-06-2007, 12:41 AM
#12
Dimitri, yeah they are on the fuel rail covers so they havent had a problem. been in there for about 8 months
Kandy, i took a product called Flourescent Acrylic. had it etched, then cut out the letters on a table scroll saw. leaving a 1" boarder at the bottom, so i could add the LEDS and so that the letters were all one piece. then covered over the 1" boarder with a bent piece of aluminum to hide the wires and LEDS
Kandy, i took a product called Flourescent Acrylic. had it etched, then cut out the letters on a table scroll saw. leaving a 1" boarder at the bottom, so i could add the LEDS and so that the letters were all one piece. then covered over the 1" boarder with a bent piece of aluminum to hide the wires and LEDS
02-10-2007, 03:22 AM
#15
Staging Lane
iTrader: (4)
Join Date: Apr 2006
Location: outside San Antonio
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Just some before and after pix of my Jimmy. I had Nathan @ LEDGauges perform the swap for me (Thanks Again Nathan).
The last one of my HVAC unit has 3 LED's and one regular bulb because I messed up one of the LED's. 
02-11-2007, 09:22 PM
#19
Copy & Paste Moderator
Originally Posted by 99WS-6T/A
where can you get the clear piece that goes where your plate would go. i want one.
Its $50 though.
