SoCal_T/A

is there a kit to supercharge an ls7 z06 yet? so far all ive found is kits for standard c6 cars

kp

iTrader: (34)

Local guy has a procharger on a new Z06, not sure if it was a kit or someone made it though, badass car either way

SoCal_T/A

do you know if its a d1,f1 etc?

andereck

There will be a tuner kit available from ATI fairly soon. There are only minor differences from the LS2 C6. Well if you consider 150+HP over the SC LS2 C6 minor. hahaha

SSilverSSurfer

iTrader: (8)

i thought i saw a thread about a silver Z06(LS7) that was a test mule for an F1, and planned hp was at 1000hp. i'll try to dig it up,
i remember it was sitting on HRE's and it was sick as hell

chuntington101

LS7 and a F1a would make a nice combo!

i thought ProCharger had destroyed a couple of LS7's while testing????

Chris.

EPP

iTrader: (22)

Swap out the pistons in the LS7 engine for forged ones, and there shouldn't be any problems. Bob

chuntington101

would you not do the rods aswell bob???

having said that i have heard of guiys on here using stock LS1 rods (before forged ones where avaliable) and making over 700rwhp out of them! and LS2 are pulling 750rwhp on stock bottom ends! lol

thanks Chris.

Stang's Bane

iTrader: (22)

Why would you swap out forged TI rods?? Maybe have them rebushed, but that is all.

andereck

That car was a victim of LS7 valvespring trouble. It broke an intake valvespring on the road. It had nothing to do with ProCharger.

andereck

The ATI ProCharger Tuner kit will have a retail of $6595 and comes standard with a P1SC-1 with a D1SC being a regular upgrade option. F1/F1C is also a possibility.

Kit should be available sometime this spring.

SSilverSSurfer

iTrader: (8)

do youknow if they ever finished that mule andereck?

andereck

Yes, kit development was done and the owner built another engine utilizing an F1C and then an F1R.

ATI currently has an '07 Z06 that is being finalized as we speak.

SSilverSSurfer

iTrader: (8)

thats awesome, you should find some videos and pics, lol. thanks for the info

Urban Legend

iTrader: (5)

That should be one fast Vette.

GrnDragon

iTrader: (4)

I have been emailing Kenne Bell and they are working on a C6 LS7 kit right now, that should be done in a couple months. I question putting it on the stock LS7, but swapping out the pistons and that would be a wild setup! I think their C5 kits sell for about $7K with a new hood.

94 slow

Hello all,
Scott over at lateral-g.net posted this video.

www.Lateral-g.net/temp/ProCharged_C6_ZO6.wmv

This ZO6 uses the factory ecu, too.

bboyferal

iTrader: (9)

Is swapping out the pistons enough to address compression on the LS7 for this?

98turbls1

iTrader: (17)

If you're going to do that wouldn't it be better to just swap out to better head gaskets....Also do they already have head studs from the factory?? If not then it would definitely help with head lifting...

staringback05

iTrader: (8)

id just plain out like to see some numbers from a blown ls7