custom build sellecting pushrods please help
02-05-2007, 10:51 PM
#1
TECH Regular
Thread Starter
iTrader: (15)
Join Date: Feb 2005
Location: Monroe, Wa.
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
custom build sellecting pushrods please help ok here is what I am building.
LS6 LME 347ci short block 9.0 to 1 C/R
stage 2 317 heads resurfaced. double springs titanium retainers and stainless valves 2.02in 1.6ex. chambers are 65cc.
stock LS1 rockers and lifters.
speed inc. turbo cam 225/225 .581 .581 113lsa
turbo around 10 - 14 psi
so, what pushrods should I go with ?? of coarse they will be hardened chromolly but what thickness and length. thanks in advance for any insight given.
~Guy
LS6 LME 347ci short block 9.0 to 1 C/R
stage 2 317 heads resurfaced. double springs titanium retainers and stainless valves 2.02in 1.6ex. chambers are 65cc.
stock LS1 rockers and lifters.
speed inc. turbo cam 225/225 .581 .581 113lsa
turbo around 10 - 14 psi
so, what pushrods should I go with ?? of coarse they will be hardened chromolly but what thickness and length. thanks in advance for any insight given.
~Guy
02-06-2007, 01:29 AM
#2
TECH Resident
Thickness, most of the aftermarket good pushrods are .080 wall thickness.
Length?? Put the motor together with the head gasket and get an adjustable pushrod to check.
Length?? Put the motor together with the head gasket and get an adjustable pushrod to check.
02-06-2007, 06:55 PM
#5
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ssdriver27
ok here is what I am building.
LS6 LME 347ci short block 9.0 to 1 C/R
stage 2 317 heads resurfaced. double springs titanium retainers and stainless valves 2.02in 1.6ex. chambers are 65cc.
stock LS1 rockers and lifters.
speed inc. turbo cam 225/225 .581 .581 113lsa
turbo around 10 - 14 psi
so, what pushrods should I go with ?? of coarse they will be hardened chromolly but what thickness and length. thanks in advance for any insight given.
~Guy
LS6 LME 347ci short block 9.0 to 1 C/R
stage 2 317 heads resurfaced. double springs titanium retainers and stainless valves 2.02in 1.6ex. chambers are 65cc.
stock LS1 rockers and lifters.
speed inc. turbo cam 225/225 .581 .581 113lsa
turbo around 10 - 14 psi
so, what pushrods should I go with ?? of coarse they will be hardened chromolly but what thickness and length. thanks in advance for any insight given.
~Guy