4"10 gear with et drag radial
#1
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: HOUSTON TEXAS
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
4"10 gear with et drag radial
How long do you guys think the 10 bolt would hold up with 4:10's and mickey et drag radials? it's a 2001 m6 camaro 230/224 cam,tune,longtubes, ory, slp lid, slp maf,? I need a gear fro the 1/8th but i still wanna hook with at least 1.8 60 fts.
#5
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Apr 2005
Location: HOUSTON TEXAS
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
My other idea is to run the factory 3:42's and 100 zex dry shot at wot, I guess i'll be in 2nd gear when i floor it. just trying to get into the high 7"s in the 1/8th.
Trending Topics
#8
TECH Addict
iTrader: (22)
Originally Posted by dameter21
How long do you guys think the 10 bolt would hold up with 4:10's and mickey et drag radials? it's a 2001 m6 camaro 230/224 cam,tune,longtubes, ory, slp lid, slp maf,? I need a gear fro the 1/8th but i still wanna hook with at least 1.8 60 fts.
PS You don't need mickey's to cut 1.8's. I had a slew of 1.87 60's in my 4.10 car with regular street tires at 32 psi.
#10
TECH Resident
iTrader: (8)
Join Date: Apr 2003
Location: Tallahassee, Florida
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
my car was a h/c/full bolt on car. i ran 4.10's on the 10 bolt to 1.83-1.9x 60's quite a few times on BFG Drag Radials. dont get me wrong, i knew i was on borrowed time, but it held up. this was actually a replacement posi/gears from the last owner that broke it.
that being said, i purchased a 9".
...after i saw "sstony" go through four 10 bolts before he bought his Dana 60.
that being said, i purchased a 9".
...after i saw "sstony" go through four 10 bolts before he bought his Dana 60.