Anybody have the Cray Scorpions on their F-Body?
02-12-2007, 02:35 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: Summerville, SC
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Anybody have the Cray Scorpions on their F-Body? I was trying to avoid the question...but has anybody put these on a F-body?
I know the backspacing is 65mm for the 18 x 10.5, so I was wondering if anybody has these?
I know the backspacing is 65mm for the 18 x 10.5, so I was wondering if anybody has these?
02-12-2007, 04:28 PM
#3
TECH Resident
iTrader: (4)
Join Date: May 2003
Location: Des Plaines, IL
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
I was looking at these awhile back. Ended up deciding against them. Check em out-.
Click Here! <- Page 2
Click Here!
Click Here! <- Page 2
Click Here!
02-14-2007, 09:02 PM
#7
Staging Lane
iTrader: (4)
Join Date: May 2004
Location: Linden, NJ
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pictures. Yes I went with the 18x10.5 in the rear and spacers were needed.
https://ls1tech.com/forums/attachmen...id=87619&stc=1
https://ls1tech.com/forums/attachmen...id=87620&stc=1
https://ls1tech.com/forums/attachmen...id=87621&stc=1
https://ls1tech.com/forums/attachmen...id=87619&stc=1
https://ls1tech.com/forums/attachmen...id=87620&stc=1
https://ls1tech.com/forums/attachmen...id=87621&stc=1
