Custom Rims Wanted...
02-15-2007, 12:51 PM
#1
TECH Resident
Thread Starter
iTrader: (4)
Join Date: May 2003
Location: Des Plaines, IL
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Custom Rims Wanted... Im in the market for some new wheels. Looking for anything custom- Boyds, Iforged, Fikse, CCW's, Intro etc... 17's or 18's, dosent matter. Chrome or Polished, dosent matter. Prefer 10" or 11" rears. I do have a set limit im looking to spend. Also can pay immediately w/ Paypal. So, show me whatcha got!!! 
Not interested in- TT2's, Y2K's, ZR1's, Z06's etc..
Not interested in- TT2's, Y2K's, ZR1's, Z06's etc..
Last edited by Kev98Ta; 02-16-2007 at 01:23 PM.
02-17-2007, 09:47 PM
#7
F/S - 4 18x9 OZ Wheels with tires
I have four OZ Superleggera wheels with Nitto 555 tires.
wheels are 18x9 offset 40 MM and have some slight curb rubbing on the very outside edges. Not bad, but could use some touch up paint.
All four rims are true and straight with no bends. Will fit Camaro, Firebird from 92-02
Tires are either 245 or 255/40ZR18 and have plenty of tread left. About 1/4 of an inch of rubber left and have perfect even wear across the board.
Looking to get $1199 for the set. 18" tires alone would cost you that.
I have four OZ Superleggera wheels with Nitto 555 tires.
wheels are 18x9 offset 40 MM and have some slight curb rubbing on the very outside edges. Not bad, but could use some touch up paint.
All four rims are true and straight with no bends. Will fit Camaro, Firebird from 92-02
Tires are either 245 or 255/40ZR18 and have plenty of tread left. About 1/4 of an inch of rubber left and have perfect even wear across the board.
Looking to get $1199 for the set. 18" tires alone would cost you that.
Trending Topics
02-18-2007, 05:37 PM
#9
Teching In
Join Date: May 2005
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of Weld EVO Radians on my vette I have been thinking about possibly selling or trading. There is nothing wrong with them I just can't stop constantly changing rims and tires. They are chrome and all 4 are 18" rims and I am running 275/40/18 Nitto 555 on the front that are about brand new and 305/35/18 Nitto 555R drag radials on the rear (that I need to replace). Do a search and check out the rim and if you are interested maybe we could work something out. I am in no hurry or really even concerned about selling them right now but if you like them we could figure something out.
http://www.corvettegarage.com/produc...5-and-z06.html
There's a site where you can see them.
http://www.corvettegarage.com/produc...5-and-z06.html
There's a site where you can see them.
