Dart 205's what cam you running?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: South Florida aka North Cuba
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Dart 205's what cam you running?
I was just looking to see some of the different cams people have tossed in with a set of out of the box dart 205's. Also without flycutting.
What kinda power/time you make?
Dave
What kinda power/time you make?
Dave
#2
hay man i have it ands sound mean i put it on tr224 and its put 406 on a4 with bad tuning.
but take my advice and flycut the pistons and get a cam like g5x3 u will be surprised.
dont foget to get a verey good tuner too make the car streetable . good luck bro
but take my advice and flycut the pistons and get a cam like g5x3 u will be surprised.
dont foget to get a verey good tuner too make the car streetable . good luck bro
#5
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
Dart 205s were run on my car with a F14 cam. The heads were milled 20 thou and there was no flycutting required. I am running a bigger cam now with the same heads with no issues.
#6
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: South Florida aka North Cuba
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sigforty
Dart 205s were run on my car with a F14 cam. The heads were milled 20 thou and there was no flycutting required. I am running a bigger cam now with the same heads with no issues.