Coating and port matching
#1
On The Tree
Thread Starter
Join Date: Jul 2003
Location: Houston, TX
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Coating and port matching
Can anyone please give me advice on coating and port matching, if its worth it.
Details:
434
4.250 crank
4.030 Iron Block
Ross Pistons
Oliver Rods
90/90 Ls2 and fast intake
adding
AR Headers
Trick flow Heads
New Cam
New rebuild
C5 A4 3.42 with built tranny and SYE 3800
ET streets
Should / is it worth it to coat and or port match parts while its apart ?
I just don't want to through money away.
Thanks,
Bill
PS: Car ran 10.6's
I ask because some people say no, some yes, and which parts are worth it.
Thanks again,
Bill
Details:
434
4.250 crank
4.030 Iron Block
Ross Pistons
Oliver Rods
90/90 Ls2 and fast intake
adding
AR Headers
Trick flow Heads
New Cam
New rebuild
C5 A4 3.42 with built tranny and SYE 3800
ET streets
Should / is it worth it to coat and or port match parts while its apart ?
I just don't want to through money away.
Thanks,
Bill
PS: Car ran 10.6's
I ask because some people say no, some yes, and which parts are worth it.
Thanks again,
Bill