Some questions regarding TREX.
#1
11 Second Club
Thread Starter
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Some questions regarding TREX.
Well to start off, I have an 02 Z28 A4 with a yank SS3600 stall and stock gears, I have most of the bolt ons, with more to com with the cam swap. I am thinking about the TREX, And I am wondering if there would be any issues running that cam with my current set up. Will I have ptv issues with stock heads, Or even if I get some LS6 heads?
Do you think that would be a good set up for a weekend driver and some strip passes??
Lane
Do you think that would be a good set up for a weekend driver and some strip passes??
Lane
#2
LS1TECH Sponsor
iTrader: (33)
Join Date: Jul 2002
Location: Out on the farm in Central IL
Posts: 4,399
Likes: 0
Received 0 Likes
on
0 Posts
Stock heads will be fine. I think you are light on gear and converter for that cam. It could be a bithch to drive with your setup. Add a 3.90+ gear and a 4K+ converter and it will be fine.