valvetrain swap party
03-01-2007, 08:17 AM
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Conshohocken, PA
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
valvetrain swap party Next weekend (either the 10th or the 11th but most likely the 10th) I am going to be having a few people from cz28.com over to swap out my valvetrain. So far its going to be John (pamperedZ) probably brian (project Z), Joe (emerica on here), and a few other friends from around me. If anyone is interested in coming im gonna get pizza and whatever so Im just trying to see if theres an interest. Could be a good chance to hang out now that the weather should be getting nicer.
Brandon
Ill post directions if theres an interest
Brandon
Ill post directions if theres an interest
03-02-2007, 05:19 PM
#4
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Conshohocken, PA
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
yea they are a pain.. but at this point im just lookin for people that feel like chillen because the three main guys i needed to help are coming. anyone else is just showing up for the sake of hanging out
03-03-2007, 04:38 PM
#6
Pussies, If you can work on LT1's you can work on anything. I fear no LT1 
No: if you have any questions feel free to PM me, ive been there and done it.
Just makesure if your doing the cam to get a threaded rod or you will break your crank bolt or **** up the threads in the crank snout.
No: if you have any questions feel free to PM me, ive been there and done it.
Just makesure if your doing the cam to get a threaded rod or you will break your crank bolt or **** up the threads in the crank snout.
03-05-2007, 08:55 PM
#7
TECH Regular
Thread Starter
iTrader: (3)
Join Date: Jul 2006
Location: Conshohocken, PA
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
ace snyper if your planning to attend i can give you directions.. PM me or just reply here and ill give them to you.. theres gonna be 4 of us and two or more may show up later.. the guys that are helping me plan on coming around 10-11..