the_merv

iTrader: (88)

I know that the Input Shafts and Bell Housings are different, but if I swapped to a T56 in my LT1 Car, and eventually swapped then Engine out for a LS Engine, can the same Tranny be used if I get the correct Bell Housing, and use the sane Pressure Plate and Bearing?

ls1 joe

iTrader: (37)

The front plate is different. The LT1 uses a clutch fork and the LS1 does not. You would have to change over the front plate, input shaft and bellhousing to make it work.

Thanks,
Amber