WTB PT-88 but where
#2
Hey,
Insane. How you been. Have you got your Rossler in the Pro Mod yet. I could be wrong, but a T-6 flange on the turbine side of your turbo would along with 3 inch exhause would allow the Turbo so spool a little slower and also less back pressure. Seems you could create more HP with less boost which keeps power robbing heat down on the Turbo. Are you not satisfied with your 85 ? Maybe we can rent the track soon? HOPE THNGS ARE GOOD FOR YOU.
Insane. How you been. Have you got your Rossler in the Pro Mod yet. I could be wrong, but a T-6 flange on the turbine side of your turbo would along with 3 inch exhause would allow the Turbo so spool a little slower and also less back pressure. Seems you could create more HP with less boost which keeps power robbing heat down on the Turbo. Are you not satisfied with your 85 ? Maybe we can rent the track soon? HOPE THNGS ARE GOOD FOR YOU.
#4
TECH Senior Member
iTrader: (59)
http://www.precisionturbo.net/turboc...tegory_id=3028
there are only two pt-88's shown; they are both t-4 flange, don't know why they list the outlet size at 3" mine measured 3.5"
there are only two pt-88's shown; they are both t-4 flange, don't know why they list the outlet size at 3" mine measured 3.5"