Question about lowering...
#1
Question about lowering...
How important is an adjustable panhard rod when lowering the vehicle? I've got a solid BMR in place now that I've had on the car since it was new. My '02 SS already had the Bilstein suspension pkg from SLP, but I just changed to the Pro-kit springs & I'm curious how much this might be affected. Honestly, I can barely even see a difference the the rear height from the two sets of springs.
Any opinions?
Shay
Any opinions?
Shay
Last edited by 98-mongooSSe; 03-07-2007 at 05:50 PM.
#3
Well I put a straight edge along the fender body line from front to back & measured how far in the top edge of the tires were. One side had 1" of clearance & the other had 1/2". Is having the rear end 1/4" off really going to make much difference? I couldn't even see the difference until I put a tape measure on it.
Shay
Shay