anyone running stock 1.7 rockers w/head&cam?
03-07-2007, 11:53 PM
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2005
Location: Ontario, California
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
anyone running stock 1.7 rockers w/head&cam? i installed my head and cam with the 1.8 harlands and two bolts snaped in half of the harlands...the 1.8 are too much stress on the valvetrain i think so i want to put in my stock ones back in till i order my yt 1.7...what do you guys think? the cam is a 229/229 with 575/575??
03-08-2007, 12:08 AM
#3
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2005
Location: Ontario, California
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
wow thats pretty good for those rockers...how much hp did you put out?
i think those damn 1.8 were hurting my hp #s i only put out 380hp and 565 rwt...and after the dyno we heared knocking from both sides of the valve covers and what was it two broken bolts from the rockers...too much stress dont you think?
i think those damn 1.8 were hurting my hp #s i only put out 380hp and 565 rwt...and after the dyno we heared knocking from both sides of the valve covers and what was it two broken bolts from the rockers...too much stress dont you think?
03-08-2007, 01:56 AM
#6
TECH Senior Member
Originally Posted by 383camaroSS
damn if i would have known that i wouldnt of bougth them pices of s**t!!!
Trending Topics
03-08-2007, 07:41 AM
#13
11 Second Club
iTrader: (6)
Join Date: Sep 2005
Location: Dracut, MA
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
Im eventually going to get Jezel. I already had Harlands and had nothing but problems with them. If your not going to go with a jezel type rocker then dont bother just use stock.
