Manual Transmission - Surface finish for SPEC flywheel



PDA

View Full Version : Surface finish for SPEC flywheel

1320FEVER
03-08-2007, 10:57 AM
I have a SPEC flywheel that needs resurfacing.

Does anyone know what finish is required for this flywheel?

I'm thinking 125 rms, but not sure.

SPEC-01
03-08-2007, 11:22 AM
You need to simply make sure that the unit is machined flat. That being said, any machine shop should be able to handle this. Let me know if you have any further questions. Thanks,