SVT BAIT
03-10-2007, 12:22 PM
i have a 97 C5 with LG long tubes,x pipe, fast 90 intake, zip tie cold air,LS2 throttle body, bullets exhaust, and its tuned im going to put a p1sc how much RWHP do u guys think ill have? :drive:
Corvette Performance - how much rwhp would i have?
View Full Version : how much rwhp would i have?
FRCvette
03-10-2007, 08:05 PM
probably about 943.26 rwhp and 894.78 rwtq... give or take about .03 hp and tq
~JOSHUA
03-10-2007, 09:24 PM
i have a 97 C5 with LG long tubes,x pipe, fast 90 intake, zip tie cold air,LS2 throttle body, bullets exhaust, and its tuned im going to put a p1sc how much RWHP do u guys think ill have? :drive:
Procharger claims 530 crank hp on a stock LS1... your mods add even more to a 'blown engine compared to N/A...
So.. let my get a handy dandy calculator out... I'd say 600 crank hp, which comes out to 540ish rwhp.
You're shortening the fuse on not only your engine, but the whole drivetrain. :bomb: Plan on repairs/upgrades.
Procharger claims 530 crank hp on a stock LS1... your mods add even more to a 'blown engine compared to N/A...
So.. let my get a handy dandy calculator out... I'd say 600 crank hp, which comes out to 540ish rwhp.
You're shortening the fuse on not only your engine, but the whole drivetrain. :bomb: Plan on repairs/upgrades.
mdhmi
03-11-2007, 03:33 AM
500-520 rwhp.
RobG03Z06
03-11-2007, 09:06 AM
500-520 rwhp.
Ditto....you might want to plan on a good clutch and a hardened output shaft with the rwhp/rwtq gains.
Ditto....you might want to plan on a good clutch and a hardened output shaft with the rwhp/rwtq gains.
M6HuggerSS
03-11-2007, 07:09 PM
it depends on just one thing. what you set your boost at.
ill guess you should make 475rwhp on 6psi
and 525 on 8psi and 575 on 10psi.
thats just a guess,
ill guess you should make 475rwhp on 6psi
and 525 on 8psi and 575 on 10psi.
thats just a guess,