View Full Version : Want a good wideband? (Group Purchase)


Pages : [1] 2 3 4 5

Derek @ EDO
03-12-2007, 08:18 PM
PM me for Pricing INFO, ITS so good we cant advertise it! :)

PLX AM AFR+ DM5 combo!
Or any PLX product your interested in!
Payment Info:
You can pay by credit card over the phone or by paying using Paypal.
If you would like to pay via credit card, please call 714-602-5741 and provide your info. We take Visa, MasterCard, Amex, and Discover. If there is a credit card that I did not list, contact us for details.
If you would like to use Paypal, submit payment to Paypal@edoperformance.com
. Either before or after submitting the payment, please contact us by(phone, email) to inform us that a payment is to be submitted. This way we can keep an eye out for the payment and make sure it is processed. We can only send packages to verified addresses if you are using Paypal. We ask that you Please include the 3% Paypal fee.

*NOTE* Additional shipping charges apply for orders shipped outside the continental United States!
Orders shipped to the following will cost an additional $20.00.
AK
Canada
Puerto Rico
Hawaii




when you call just tell state that you are with
LS1tech's/ Performancetrucks.net's Group Purchase
If using paypal just put that in the "Notes" part.
Be sure to state which color gauge you would like!!

This GP is still active, 04-27-08

_______________________________________________
PLX Stock Narrowband Replacement instructions! (http://www.plxdevices.com/AppNotes/PLXApp004.pdf)

Make sure that there is a PLX wire inserted into the top right slot on the analog connector that plugs into the sensor module.

When tapping into the 02 sensor harness to use the Narrowband emulation feature tap into the purple high signal wire.

Thanks,
Derek
_______________________________________________

Phlip00WS6
03-12-2007, 09:25 PM
If its cheaper then $250 Im definatley interested

dementia
03-12-2007, 10:36 PM
some details would be nice :P

Derek @ EDO
03-12-2007, 11:07 PM
Will post up all the details tommorow ASAP!!

911ss
03-12-2007, 11:34 PM
i may be down, lets see what it includes

97rs4life
03-12-2007, 11:44 PM
yea anxious to see the details tomorrow

Danger731
03-13-2007, 08:27 AM
ok waiting !

transamfreak01
03-13-2007, 10:11 AM
me 2!!!

Z284U2TRY
03-13-2007, 12:45 PM
Any word?

teddyca
03-13-2007, 01:38 PM
for under $250 I might go for it as well.

1QUIKWS6
03-13-2007, 03:06 PM
Does this setup have 0-5v output for tuning?

Didn't see any mention of it on the site?

sidewayz28
03-13-2007, 03:14 PM
im interested !

Jaspirr
03-13-2007, 03:37 PM
also interested..

Derek @ EDO
03-13-2007, 04:23 PM
UPDATE
click link in first post!

I will update with all the info of the GP as soon as we come up with the final details.

Derek @ EDO
03-13-2007, 04:39 PM
http://www.plxdevices.com/iMFD/SMAFR_Front.jpg
1. Connects to 12V-18V power source.
2. Analog outputs (0-5V linear wideband output, 0-1V narrowband output, ground)
3. Termination jumper. Closed for first SM in daisy chain.
4. Connects to next SM in daisy chain or to first DM
5. Connects to previous SM or unconnected if first SM in daisy chain
6. Connects to O2 Sensor Harness then to Bosch sensor.

sidewayz28
03-13-2007, 11:51 PM
^ thats all chinese to me :jest: , im betting PLX sells A LOT of these!

1QUIKWS6
03-14-2007, 03:20 AM
2. Analog outputs (0-5V linear wideband output, 0-1V narrowband output, ground)

That be good!

I take it we would have to sign up over at Performance Trucks to get in this?

Derek @ EDO
03-14-2007, 04:19 PM
No, just wanted to let yall in on it.
BTW your alredy signed up there lol.

Will update ASAP, Pricing should be in tommorow!!

1QUIKWS6
03-14-2007, 05:06 PM
Ya know, as long as I have been a member here; I've never paid attention to the tabs banner at the top of the screen :bang: :eyes: :jest:

silverZ98
03-14-2007, 08:40 PM
is it going ot be the one with round gauge or squre looking one

Derek @ EDO
03-15-2007, 03:31 PM
round guage!

silverZ98
03-15-2007, 04:56 PM
cool we got a price yet?

2000Hawk
03-15-2007, 06:36 PM
Nice gauge, very interested as well.
-Joel

Derek @ EDO
03-15-2007, 09:16 PM
Well the guy that was suppose to call me and give me the pricing info took off today (personal) but he will be back tommorow. The owner of the company called me and said that he will call kevin and get everything straight and that Kevin will be calling me tommorow.

I do know that the price will be better then or at least 250.00 shipped
It all depends on the interest on the GP, the more people the better.

Guys please dont feel like i am holding off on this thing, i am giving the info as soon as i get it. I want one of these things just as bad as the rest of yall. I think we can get a pretty good price with the turnout im expecting to see.

Thanks again.

sidewayz28
03-15-2007, 09:55 PM
right on, thanks for the update

97rs4life
03-16-2007, 01:43 AM
sweet, good to hear they are working on it. I could use a good wideband for my camaro.

Derek @ EDO
03-16-2007, 01:38 PM
Ok guys here is the info you all have been waiting for!

This is for PLX SM-AFR & DM-5 Combo
It comes with the gauge the module and 02 sensor!
http://www.plxdevices.com/iMFD/SMAFR.jpg http://www.plxdevices.com/iMFD/DM-5AFRBlack.jpg

Group 1 = 20 Buyers Price =249.00 shipped
Group 2 = 30 Buyers price =239.00 shipped
Group 3 = 50 buyers Price =225.00 shipped

Heres how this GP will work
If you are interested you will need to pick a group from above and PM me your name and let me know whether you will want a Black or White gauge.
I will PM you when your group reaches the reqd. amount of buyers, I will then give you payment info!

If you pick (group 1)the first 20 buyers we have interested will allow you to purchase your Wideband setup for 249.00 shipped, this way you will get it as soon as we reach 20 instead of waiting until we get 30 or 50 buyers.
This will be great if you want your wideband ASAP, if you are willing to wait a little longer and choose group 3 when we have a total 50 interested buyers the price will then be 225.00 shipped

The current list and group details will be on page one on the first post.
I will update the list DAILY!

If there are any questions please let me know!

BTW there are no time deadlines on this, Its simply when we get X amount! :judge:


Thanks, Derek

sidewayz28
03-16-2007, 03:13 PM
bwahg

BADSZ28
03-16-2007, 03:22 PM
I want group 3. What do I have to do?

BADSZ28
03-16-2007, 03:25 PM
Questions...does it come with software to data log? Can HPT accept the output to log sychronized with this?

Derek @ EDO
03-16-2007, 04:04 PM
im interested in group 3. My names Joseph Villanueva and id like a black one! thanks for getting this together!

-Joe

No problem Joe thanks for your interest!

Questions...does it come with software to data log? Can HPT accept the output to log sychronized with this?



I read this off of HP tuners online fourm

"Posted by: FixedRoof I have the PLX SM-AFR. I had absolutely ZERO problems setting it up with HPT. I wired it properly with the single WB wire running from the PLX box to the EIO input 1 and it works perfectly. I did use a single cap from the EIO ground to the EIO input just for filtering... but I dont think it's needed."

So it seems like it works perfectly!

All you have to do is sit back and wait till we get 50 buyers, Once we do ill send you a PM and give you a number to call and place your order! :judge:

tonight i will post up the interested buyer list on page 1
post 1.

please PM me if interested.
Thanks

BADSZ28
03-16-2007, 04:07 PM
Great! What about on it's own though? I do not have the EIO yet, so just to log the WB by itself?

Derek @ EDO
03-16-2007, 04:16 PM
Great! What about on it's own though? I do not have the EIO yet, so just to log the WB by itself?

another post from the HP tuners fourm

"You want an entry level unit that will work well with your MPVI pro-The LC-1 from innovate or plx SM-AFR are probably the best choice for you as they both have analog outputs that work great with the MPVI pro unit. Neither come with a separate display like the LM-1 but with the ability to log through HP Tuners scanner there isn't much need for one. These are permenant mount units unless you can make them portable by yourself so these are intended for just your vehicle."

it looks like it will work for you. If you want you can call PLX and they should be able to give you a definite answer.
PLX # is 408) 745-PLX1 (7591) Tech Support: Press 2

BADSZ28
03-16-2007, 04:19 PM
Thanks man. New to the WB game and I know I need one. Just want to be sure I pick one for my needs.

Danger731
03-16-2007, 04:27 PM
Put me in Group 1 with a white guage

Derek @ EDO
03-16-2007, 04:35 PM
Thanks man. New to the WB game and I know I need one. Just want to be sure I pick one for my needs.

the more questions the better, someone might need to know the answer as well!

BTW what color are you interested in?

BADSZ28
03-16-2007, 04:47 PM
What color of what? The gauge or the control?

99Silverado5.3
03-16-2007, 06:08 PM
What color of what? The gauge or the control?

gauge

marthastewart
03-17-2007, 01:40 AM
any deal if we want it without the gauge (guess it would be just the PLX SM-AFR)? Im ready to order so if not, its cool I will just go through them.

Derek @ EDO
03-17-2007, 01:44 AM
i will check on that for you, it will be monday before i can get back to you with the answer.

02 BLK WS6
03-17-2007, 02:16 AM
Group #1 count me in....

97rs4life
03-17-2007, 04:38 PM
is only the face of the gauge white or the outer trim white also?

Derek @ EDO
03-17-2007, 06:12 PM
im not sure, ill try to find out though!

adown
03-18-2007, 12:02 AM
Count me in on a black face. Group 3, I'm in no hurry. Does this also immulate a NB so I can take one out and trick the car to thinking its still there? Thanks, adown

Derek @ EDO
03-18-2007, 03:38 AM
Yep, see here for more info.
http://plxdevices.com/AppNotes/PLXApp004.pdf

1dirtyZ
03-18-2007, 05:33 AM
sign me up for a black one in group 3 please.

BADSZ28
03-18-2007, 10:36 AM
What colors are available? Would it be for the face or the ring? A link on this would be great.

Derek @ EDO
03-18-2007, 12:18 PM
black and white is available

BADSZ28
03-18-2007, 05:22 PM
White for me man.

BTW, thanks for all your efforts in putting this together.

Derek @ EDO
03-18-2007, 05:41 PM
Not a problem man, with all the knowledge ive gained off of this fourm and all the stand up guys on here willing to help anyway they can, my time invested on stuff like this is the least i can do!

Derek @ EDO
03-18-2007, 11:50 PM
Well, we are halfway there group 3! Keep the orders rolling in where we can get these things shipped out!
Keep spreading the word about the GP, I dont want anyone to miss out!
Thanks!

dementia
03-19-2007, 12:49 AM
I may be in for group 3 if I can pick up this job soon. I should know sometime this upcoming week.

Derek @ EDO
03-19-2007, 11:14 AM
Payment Info to group 1 Sent, If you didnt recieve it and you are in group one please let me know!!!


Thanks!

97rs4life
03-19-2007, 11:20 AM
whats the updated total people chart look like so far? any word on the white face gauge looks?

Derek @ EDO
03-19-2007, 11:22 AM
any deal if we want it without the gauge (guess it would be just the PLX SM-AFR)? Im ready to order so if not, its cool I will just go through them.



185 shipped If we have more then 10 people wanting this option i can get a lower price!

Let me know if you would like this deal, I will PM you the payment info and you can get your order placed!

I have 27 people interested!
two are from another fourm so they are not on the list!
Im working on the white gauge pics!

marthastewart
03-19-2007, 11:29 AM
185 shipped If we have more then 10 people wanting this option i can get a lower price!

Let me know if you would like this deal, I will PM you the payment info and you can get your order placed!

I have 27 people interested!
two are from another fourm so they are not on the list!
Im working on the white gauge pics!

Yeah I just got it for the same price as that. Thanks anyway man.

Derek @ EDO
03-19-2007, 11:33 AM
ok :)

BlackZ28629
03-19-2007, 11:38 AM
NOt to butt-in or anything, but AEM's wide band controller is a way better device for about the same price. I couldn't be happier!...Just passin along some info :)

sidewayz28
03-19-2007, 11:59 AM
yea? do you have experience with the PLX wideband?

Derek @ EDO
03-19-2007, 02:11 PM
http://i99.photobucket.com/albums/l282/DLH2006/white.jpg
that is the pic of the white gauge!

I have not had one, i have seen them and lots of happy people!

Is that your opinion, or do you have written proof (facts) that the AEM is a better unit?
did you own a PLX unit and switch over to the AEM to justify the difference?
looks like the AEM's go for 280.00 plus shipping?

Goldstreak65
03-20-2007, 09:25 AM
Im thinking about using this on a forced induction application, is this an ideal unit for that. Does it have any kind of record feature so I can log it on the desktop and see graphs of A/F ratio with respect to rpm?

thanks

Derek @ EDO
03-20-2007, 09:55 AM
Unfortunately this particular model does not have a "record" function built in to the unit itself. As for using it for FI the Bosch LSU sensor can withstand up 850* EGT which should be enough. PLX does manufacture other wideband controllers with "data logging" Capabilities such as R-300 and R-500 models.
http://plxdevices.com/products_widebandO2.htm
If you would like pricing info on one of those models let me know!



Thanks

marthastewart
03-20-2007, 10:47 AM
Im thinking about using this on a forced induction application, is this an ideal unit for that. Does it have any kind of record feature so I can log it on the desktop and see graphs of A/F ratio with respect to rpm?

thanks

If you get HPT or another tuning program like that it will plug in and do what you want and much more.

Derek @ EDO
03-20-2007, 11:04 AM
thats true

Danger731
03-20-2007, 02:54 PM
That's what I was hoping it had ! I'm going to use it when I tune for spray.

Danger731
03-20-2007, 03:01 PM
What the heck ?, Is group 3 gunna be able to order sooner that Group 1 ??
And pay less !

02 BLK WS6
03-20-2007, 03:05 PM
I paid today, time for the rest of group 1 to step up to the plate.........

Derek @ EDO
03-20-2007, 03:28 PM
What the heck ?, Is group 3 gunna be able to order sooner that Group 1 ??
And pay less !

I will get things straight!

Kevin must not realize that all we had was 3 group one orders!

02 BLK WS6
03-20-2007, 04:10 PM
I will get things straight!

Kevin must not realize that all we had was 3 group one orders!

Yeah, keep me up to date please. If I have to wait as long as the group 3, might as well have been in group 3.

Derek @ EDO
03-20-2007, 04:14 PM
Will do man! He was out of the office so i emailed him!
I understand exactly where you are coming from and i stressed that in the email!

Im sure it was just a misunderstanding between him and I! :)

Johnny5
03-20-2007, 10:02 PM
I'm interested in the combo deal with the Black gauge.

I don't know how much these normally are for this so I guess I'm flexible on the group. I don't want to wait forever but I'd rather have it within the month.

PM or respond back and let me know where things are with this. Thanks.

P.S. If you want to sell a few more it may be worth while to put some consolidated info in the first post... lot of digging going on here :)

- john

Danger731
03-20-2007, 10:15 PM
yeah let me know !, heck !

sidewayz28
03-20-2007, 10:52 PM
hows group 3 looking?

Derek @ EDO
03-20-2007, 11:07 PM
we have like 30 people total

sidewayz28
03-21-2007, 12:15 AM
damn more then i expected! thanks for the update

Danger731
03-21-2007, 06:24 AM
Let me know if I need to switch to group 3

Derek @ EDO
03-21-2007, 11:48 AM
Should be hearing back from kevin shortly!

Derek @ EDO
03-21-2007, 03:02 PM
Ok guys, Group 1's orders are now being processed and should ship out today or tommorow, If anyone has anymore questions please contact me!!
Thanks again!

Johnny5
03-21-2007, 03:14 PM
When do you think the next group is going to ship. I said group three but I'd bump up one just to get it on its way.

BADSZ28
03-21-2007, 03:51 PM
Ok guys, Group 1's orders are now being processed and should ship out today or tommorow, If anyone has anymore questions please contact me!!
Thanks again!


How is this possible? You only have a couple group 1's on your list. You needed 20 people to ship group 1 at 250. Please explain.

Derek @ EDO
03-21-2007, 04:18 PM
No, i needed at least 20 people on the list total that was interested in any of the groups
When i had 20 people on the list i sent a PM to all of the group 1 guys giving them payment info! PLX didnt know exactly how many people we had for group 1 so thats why they stated that they would ship when they have a total of 10 orders paid for! I contacted them and informed them that all we had was 3 group one members total!

Danger731
03-21-2007, 04:57 PM
I see !

BADSZ28
03-21-2007, 05:08 PM
Ahhh...just tell me when I can order group 3. I have time.

Derek @ EDO
03-22-2007, 08:12 AM
Ttt!!

97rs4life
03-22-2007, 03:48 PM
woot! 20 more people, spread the word guys

dementia
03-22-2007, 04:16 PM
This thing is going on for a while right? I ended up picking up that job and i start on Apr 2nd but wont get paid till 2 weeks after that but I'm almost positive i'm getting group 3.

Derek @ EDO
03-23-2007, 07:19 PM
No deadline date!!!

dementia
03-24-2007, 01:03 AM
Awesome, once I get my first paycheck I'll more than likely be giving u the go ahead to put me in group 3.

faux+
03-25-2007, 11:58 AM
Hi! I just found this GB while searching online pricing for the subject PLX hardware. If you don't mind an interloper getting in on the deal, I'd be happy to be added to the group 3 list for one unit with a black face gauge. Might be able to interest some others too.

Thx.

Alan

Derek @ EDO
03-25-2007, 12:25 PM
no problem man, anyone is welcome in!!

Lurius
03-25-2007, 04:46 PM
Come on guys, call up soem buddies and have them come buy a WB lol. Only 20 more.

-Lurius

sidewayz28
03-25-2007, 11:18 PM
i copied this quote from another thread:
So that means you would be running a wide band o2 sensor 24/7... which is a no no....

are widebands not displaying the AFR 24/7?? as in whenever the car is on?

Derek @ EDO
03-25-2007, 11:35 PM
Whenever the car is running the wideband will tell you the air/fuel mixture ratio.
There isnt a problem with running a wideband all the time, I have no idea what that guy is talking about!

truckmann
03-26-2007, 07:54 AM
Even so, if someone is really that worried about it they can always take it out. No one ever said it had to be run all the time. From what I can gather the only possible downfall of having it in all the time would be to shorted the life of the sensor, and they can be replaced easy enough.

bigbadwolf54
03-26-2007, 10:59 AM
Have any of the other group 1 guys got theirs in yet??

02 BLK WS6
03-26-2007, 12:08 PM
Have any of the other group 1 guys got theirs in yet??


Not me!!!!!!!!!!

bigbadwolf54
03-26-2007, 12:14 PM
Not me!!!!!!!!!!
me either..I havent even gotten a shipping confirmation like they said I would when it shipped out..they've charged my card for it though.... :judge:

02 BLK WS6
03-26-2007, 04:32 PM
I haven't checked to see if I was charged yet. If you were I'm sure that I have been.

Derek @ EDO
03-26-2007, 04:37 PM
ill call them right now, thanks for the update! If i dont get in touch with them since its 4:36 ill leave a message!

Derek @ EDO
03-26-2007, 04:39 PM
Left a message!

97rs4life
03-27-2007, 12:48 PM
bump, need some more people fellas! Almost there

SY732
03-27-2007, 02:17 PM
Does it have an output to turn the N20 off if it goes lean? like the dynojet?

Danger731
03-27-2007, 03:32 PM
I hope someone in group 1 gets theirs soon .....

bigbadwolf54
03-27-2007, 05:29 PM
I hope someone in group 1 gets theirs soon .....
your not the only one..... :disgust:

02 BLK WS6
03-27-2007, 06:33 PM
Nothing for me yet either!!!!

bigbadwolf54
03-27-2007, 08:20 PM
Nothing for me yet either!!!!
DLH2006 said he got ahold of someone else and that they should be gettin us our stuff along with shipping info soon..... I'm impatiently waiting :judge:

Derek @ EDO
03-27-2007, 09:33 PM
I understand guys, I will be out of town tommorow, well actually out of state but i will get that info tommorow! I will call you guys who are waiting if i cant get to a computer!

02 BLK WS6
03-28-2007, 10:55 AM
Since you are out of town, I took the liberty of calling myself. For all group 1 that has paid::::: They were mailed, yes mailed USPS, on the 21st of March. I was told that if we don't have them by Friday, to call back.......

I understand guys, I will be out of town tommorow, well actually out of state but i will get that info tommorow! I will call you guys who are waiting if i cant get to a computer!

bigbadwolf54
03-28-2007, 12:13 PM
Since you are out of town, I took the liberty of calling myself. For all group 1 that has paid::::: They were mailed, yes mailed USPS, on the 21st of March. I was told that if we don't have them by Friday, to call back.......
ahh the lovely USPS :judge: haha well ok thanks for the update, It's good to know that its been shipped at least

bowtierodder
03-28-2007, 12:27 PM
are these in stock and ready to ship at $225?

bigbadwolf54
03-28-2007, 01:07 PM
see post # 27 for full info, but at 50 buyers it is $225 shipped, at 30 buyers it is $239 shipped. I'm impatient so I got in at 20 buyers for 249$shipped and its supposed to be here any day now.

97rs4life
03-28-2007, 05:27 PM
are these in stock and ready to ship at $225?

yes once we reach 50 people, so get your name in if you want one. I am anxious to get one as well

Derek @ EDO
03-29-2007, 01:49 AM
Cool guys, Glad there on the way! Just got home, been gone since 3:00 AM
Went to Kansas City (PLANE) on the way back we drove!
What a long drive that was. Anyways were getting closer to our goal!!

dementia
03-29-2007, 02:48 AM
whats the count up to?

Derek @ EDO
03-29-2007, 02:53 AM
36 or so! including the ones from other boards

02 BLK WS6
03-29-2007, 11:52 PM
Didn't show up on Thursday.......... Hopefully it will be here Friday, I know that my parts from UMI will make it friday.......

bigbadwolf54
03-30-2007, 09:00 AM
I'm in the same boat..no show on Thursday, hopefully today because I'm doing my cam swap tonite/tommorrow and would like to throw this on at the same time...

02 BLK WS6
03-30-2007, 12:20 PM
It's Friday and the mail has been delerivered. Guess what,


















No wideband!!!!!!!!!!!!!!!!!!!!!!!!!

truckmann
03-30-2007, 01:03 PM
At least with USPS there is still a chance of it showing up tomorrow. :)
I hope a few more people hurry up and sign up to get us up to 50 so I can order mine. I'm planning on getting headers soon, so it would be nice to have a wideband to tune for the headers.

bigbadwolf54
03-30-2007, 01:55 PM
Kevin from EDO just contacted me and apparently these are drop shipped from PLX directly...he has another one on the way since mine hasnt got here either.........

Derek @ EDO
03-30-2007, 05:03 PM
He Contacted me as well and informed me of the situation!
He told me the same thing!

02 BLK WS6
03-30-2007, 10:55 PM
Kevin from EDO just contacted me and apparently these are drop shipped from PLX directly...he has another one on the way since mine hasnt got here either.........

I called today and they are sending the widebands out to you and I again. He asked that if we end up with 2 of them to call him to get one of them returned. The 2nd ones should be shipped fedex or ups with tracking information.

truckmann
03-30-2007, 11:03 PM
Sounds like they have good customer service and are doing everything they can to get your widebands to you even amidts all the troubles.

Lurius
03-31-2007, 12:07 AM
What we need now, 14-16 more people and we can get ours at 230$ shipped? Come on guys, that should be enough motivation right there!

-Lurius

Derek @ EDO
03-31-2007, 09:41 AM
225 shipped!

Phantom
03-31-2007, 09:54 AM
how many more before i can get mine?

Derek @ EDO
03-31-2007, 09:58 AM
15-16, which isnt alot. We can get it if we spread the word lol

Derek @ EDO
04-01-2007, 09:01 PM
ttt!!!

Lurius
04-02-2007, 11:17 AM
Bump. Any more people on this yet?

-Lurius

Derek @ EDO
04-02-2007, 04:07 PM
nobody else has pmed me yet

Hi Volume
04-02-2007, 07:35 PM
Didnt see it, but does the bosch sensor come with it? I can get these units with sensor for $300, sooo $230 plus $70 sensor = not that great of a deal and now you have to do twice the work for one piece of equipment, let me know. I can bring 3-4 people to buy them ASAP. thanks

bigbadwolf54
04-02-2007, 08:56 PM
Didnt see it, but does the bosch sensor come with it? I can get these units with sensor for $300, sooo $230 plus $70 sensor = not that great of a deal and now you have to do twice the work for one piece of equipment, let me know. I can bring 3-4 people to buy them ASAP. thanks
This comes with the O2 sensor, module, and the gauge....now if I ever get mine I'll be sure to demo it for everyone........ :bang: so bring the 3-4 other ppl on in to help out the group 3 quota!

truckmann
04-02-2007, 09:08 PM
^^^^ What he said. My wife's gonna shoot me if she finds out how much money I have spent in the last month. :)
The wideband is the last thing on my list for a while unless I find a deal on a cam that I just can't turn down...:jest:
It would be nice to be able to get this wideband deal through soon so I can tune for my headers that are due to be installed soon. :devil:

Derek @ EDO
04-02-2007, 09:51 PM
lol :lol:

bigbadwolf54
04-02-2007, 10:06 PM
haha I really need to stay away from this place, my pocket book keeps getting lighter everytime I find something that I have on my lenghty list as well...it never ends though

truckmann
04-02-2007, 10:21 PM
If I could find someone to buy my other truck at least I wouldn't feel so bad about all the money I have spent up to this point. :jest: I know at the least I will be looking to get a new cam sometime, I'm just hoping to space it out a little since I spent so much recently. :lol: I would love to be to a point financially to look at the new TVS's when they come out. Guess I should start saving now!

02 BLK WS6
04-03-2007, 01:48 PM
Had to call PLX myself. Needless to say I'm not very satisfied with this transaction. I guess that the Post Office has been notified about my shipment.....................


Label/Receipt Number: 9121 0105 2129 7200 7644 32
Status: Electronic Shipping Info Received

The U.S. Postal Service was electronically notified by the shipper on April 1, 2007 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.

N4cer
04-03-2007, 03:13 PM
Had to call PLX myself. Needless to say I'm not very satisfied with this transaction. I guess that the Post Office has been notified about my shipment.....................


Label/Receipt Number: 9121 0105 2129 7200 7644 32
Status: Electronic Shipping Info Received

The U.S. Postal Service was electronically notified by the shipper on April 1, 2007 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.
That sucks. I don't know if you've used USPS's online label system much, but really they haven't been "notified" in the traditional sense. It just means that the label has been printed from their system. The package may or may not have been shipped yet, because some USPS locations have a policy by which they don't scan in Delivery Confirmation upon acceptance... only upon delivery.

bigbadwolf54
04-03-2007, 03:27 PM
great, more BS...I thought the 2nd ones were to be shipped with something other than USPS?? and thanks alot for the shipping info PLX..NOT!! This transaction just keeps getting worse. Are we the only 2 outta the 3 that havent got ours in yet 02 BLK WS6???

97rs4life
04-03-2007, 04:34 PM
usps don't give tracking like UPS, just tell ya if it was delivered and what time. THat is why it is called delivery confirmation.

If it was April 1, then you should get it April 4 most likely as priority mail takes 2-3 days. Unless it wasn't delivered on April 1, but it should be to you this week sometime yet

02 BLK WS6
04-03-2007, 04:46 PM
usps don't give tracking like UPS, just tell ya if it was delivered and what time. THat is why it is called delivery confirmation.

If it was April 1, then you should get it April 4 most likely as priority mail takes 2-3 days. Unless it wasn't delivered on April 1, but it should be to you this week sometime yet

Things always seem to take about a week to get to me from the West Coast.

truckmann
04-03-2007, 06:28 PM
I hope you guys end up getting your units soon. I don't want to have to be worried about placing this order if it ever gets to 50 people.

nighthand
04-04-2007, 03:53 PM
Add me too to group 3!

Derek @ EDO
04-04-2007, 11:23 PM
Any update guys on the shipment?
Im sorry for the incoveince.
I personally have had issues with USPS. They lost 8 of my pushrods! HOW IN THE HELL..... anyways lol keep us updated.

Z'mnypit
04-05-2007, 07:20 AM
How long will this last?

truckmann
04-05-2007, 09:10 AM
There is no time limit or deadline.

Z'mnypit
04-05-2007, 09:25 AM
Ok, thanks! So has anyone actually received these yet?

bigbadwolf54
04-05-2007, 12:52 PM
Ok, thanks! So has anyone actually received these yet?
not to my knowledge..3 of us were in the group 1 purchase and I know at least 2 of us have not received ours yet.
EDIT** mine just showed up via USPS!! :headbang: looks great, now I gotta install it so I can tune for my cam that was finished last night :judge:

sidewayz28
04-05-2007, 02:58 PM
nice! how long did it take to get to u?

truckmann
04-05-2007, 03:19 PM
not to my knowledge..3 of us were in the group 1 purchase and I know at least 2 of us have not received ours yet.
EDIT** mine just showed up via USPS!! :headbang: looks great, now I gotta install it so I can tune for my cam that was finished last night :judge:Good timing for you! Now we just need another 15 people or so to join in so I can order mine. :)

bigbadwolf54
04-05-2007, 03:55 PM
nice! how long did it take to get to u?
supposed to have shipped out monday from CA, so 3 days priority mail.

99BackNBlackZ28
04-05-2007, 04:30 PM
I'm in for whatever group will get here the fastest. Looking for a black one.

Derek @ EDO
04-05-2007, 06:44 PM
cool man glad ya got it! sorry for the delay!!!
Keep us updated on the install and tell us how it went!

bigbadwolf54
04-05-2007, 07:30 PM
:headbang: I just got through installing mine, it went fairly easy, ya gotta be carefull assembling the power/ground connection though. Sorry no install pics, it decided to start raining AND dropped about 20 degress half-way through the install. It also says that my WOT AFR is right on with what it should be :)

02 BLK WS6
04-05-2007, 08:23 PM
Mine came today, but my wife didn't answer the door. So I didn't really get it, but would have if she would get off of her ass.

truckmann
04-05-2007, 09:23 PM
Ooo that would piss me off..:judge:

bigbadwolf54
04-06-2007, 12:35 PM
Heres a few installed pics of the DM gauge....
http://i18.photobucket.com/albums/b123/sdimedrvr/100_1550.jpg
http://i18.photobucket.com/albums/b123/sdimedrvr/100_1548.jpg

Derek @ EDO
04-06-2007, 12:36 PM
looks sweet man!

Derek @ EDO
04-06-2007, 02:03 PM
******LIST UPDATED*******
Page 1 Post 1

02 BLK WS6
04-06-2007, 07:50 PM
Ooo that would piss me off..:judge:

I told her to pick it up from the post office Sat. morning. I have been working 12 hr days with a 2 hr commute each way= no time.

97rs4life
04-07-2007, 01:01 AM
11 more!! woot! We can do this

Derek @ EDO
04-07-2007, 04:21 PM
yep, were close.
yall Feel free to invite some people from other fourms to join in.
or have them stay tuned to this thread when we hit 50.

I will post up the contact information and whom to call to pay when all 50 spots have been filled. This will be easier then sending out 50+ PM's.
I will tell them that we may have several extra people that arent on the list participate in the GP. This way all the people from the other boards will not have to create a user name here if they do not wish too, all they have to do is look at the contact info on here and call and state that they are part of LS1techs wideband GP!

Thanks guys

99Silverado5.3
04-07-2007, 09:40 PM
Nice...bump

pkincy
04-07-2007, 10:30 PM
What woulld the price be for just the SM-AFR. I don't need a guage as I will use it with EFILive.

Perry

Derek @ EDO
04-07-2007, 10:40 PM
185.00 shipped!

adown
04-08-2007, 12:00 PM
Come on guys, we still need 9 more for group 3.

dementia
04-08-2007, 01:04 PM
If i sign up for group 3 now when do i have to pay?

Derek @ EDO
04-08-2007, 01:07 PM
when we reach 50 people.
so probably within a week.

truckmann
04-08-2007, 01:11 PM
when we reach 50 people.
so probably within a week.
:whip: I hope so!

dementia
04-08-2007, 02:14 PM
i get paid on friday, should i sign up now?

Derek @ EDO
04-08-2007, 02:19 PM
If you would like one def. sign up. Im sure we wont start paying before then. Besides, i doubt all 50 people pay in one day lol it may take a few days.
would you like me to add you to the list?

lynx853
04-08-2007, 02:40 PM
count me in! but I am forgetfull, so sombody needs to PM me when its payup time

Derek @ EDO
04-08-2007, 02:43 PM
will do!

dementia
04-08-2007, 02:52 PM
sure put me down for group 3, black face gauge

Derek @ EDO
04-08-2007, 02:58 PM
your down, ill update the list again tonight! we need 7 more BTW!

lynx853
04-08-2007, 10:52 PM
oh yeah, black face gauge if possible too!

Derek @ EDO
04-08-2007, 11:20 PM
tried to update list but Site was having TECH issues, will update tommorow i guess!

adown
04-09-2007, 02:24 PM
Bump,,,,, keepin it on top

Danger731
04-09-2007, 03:03 PM
OK I'm a definite @ 185 for the group 3, thanks for the PM

sbusby
04-09-2007, 03:07 PM
Fine, I'll do 185 for it.. black please :D

Derek @ EDO
04-09-2007, 04:20 PM
you are aware that 185.00 shipped is the SM-AFR, it has everything but the gauge!

pkincy
04-09-2007, 04:57 PM
Shouldn't we read the whole thread or am I wrong.

The $185 is for the unit minus the guage. $225 is the price with the guage. It looks like the last 4-5 people are expecting the guage for the $185 price. The controllers are all in red.

Perry

Let me know if I am mistaken.

Derek @ EDO
04-09-2007, 06:19 PM
Shouldn't we read the whole thread or am I wrong.

The $185 is for the unit minus the guage. $225 is the price with the guage. It looks like the last 4-5 people are expecting the guage for the $185 price. The controllers are all in red.

Perry

Let me know if I am mistaken.

you are correct

code4
04-09-2007, 07:12 PM
Count me in! Where do I sign up?

I want the black gauge

Derek @ EDO
04-09-2007, 07:25 PM
added! 5 more guys!

Derek @ EDO
04-09-2007, 07:31 PM
UPDATED P.1 Pst-1

Derek @ EDO
04-09-2007, 10:28 PM
4 more guys come on!!!! Looks like orders may start being taken this week if we keep it up!!

truckmann
04-09-2007, 10:32 PM
Sweet!

97rs4life
04-09-2007, 10:46 PM
oh man, the last few are adding up quickly. I am shocked at how fast we were able to get this many for it. I can see my wideband in the horizon now.

jeffboy757
04-09-2007, 11:14 PM
ADD ME for "3" n pm me on payment details, black gauge

Danger731
04-10-2007, 12:57 AM
OK I'm a definite @ 185 for the group 3, thanks for the PM

thanks for the pm again. I do want the guage so 225 it is.

sidewayz28
04-10-2007, 01:04 AM
dont we need 10 more since there are 5 people from group 1 on the list?

b005td
04-10-2007, 01:18 AM
oh shoot i am in for group 3, $225
edit: i want it in BLACK

Derek @ EDO
04-10-2007, 05:06 AM
nope, needed 50 total people!

Derek @ EDO
04-10-2007, 05:18 AM
2 more!

Danger731
04-10-2007, 07:15 AM
You got me as a definite on the white guage 225.oo ?

Derek @ EDO
04-10-2007, 10:25 AM
yep!!

Lurius
04-10-2007, 10:51 AM
Dude, this rocks. Only 2 more away from this, lets do it guys!

-Lurius

Danger731
04-10-2007, 11:36 AM
Sweet

SonofaBish
04-10-2007, 12:11 PM
definitely a sweet deal... I got myself in last night... come on guys, just a few more!!!!

motohead400
04-10-2007, 12:26 PM
Just sent DLH a PM. I'm in for group 3 - Black

Derek @ EDO
04-10-2007, 01:08 PM
1 more guys!!!!

sidewayz28
04-10-2007, 01:41 PM
wow, looks like we'll start payments by the end of the night :devil: thanks DLH for putting this together

97rs4life
04-10-2007, 01:42 PM
c'mon you lukers (sp?) step up and say you want in as well please. Time for you quiet guys to post up, lol

Derek @ EDO
04-10-2007, 01:48 PM
the last guy on the list is going to be someones hero lol!
nota problem guys!

jknox
04-10-2007, 01:58 PM
Damn, my credit card is gonna hate me! :cry:

Put me in for a group 3 black face! :devil:

Jerry

sidewayz28
04-10-2007, 02:05 PM
alright looks like we got 50! :) so hows does this work now? will they send them out once EVERYONE pays or is it first come first serve type a deal?

Derek @ EDO
04-10-2007, 04:06 PM
Ok guys we have made IT!
Im sure they will start shipping them out once they have XX amount of people paid!

i will find out what that XX amount is rather shortly!

Eagle02
04-10-2007, 04:08 PM
Can I still get in on this? I want the $185 deal without the gauge...

Derek @ EDO
04-10-2007, 04:11 PM
sure can! just use the payment info posted on the first page of this thread post 1

Derek @ EDO
04-10-2007, 04:12 PM
******PAYMENT DETAILS POSTED ON PAGE 1 POST 1***********
http://www.ls1tech.com/forums/showthread.php?t=674815&page=1&pp=20
Thanks guys.

truckmann
04-10-2007, 05:48 PM
My first attempt to place and order didn't go well. I called the number you gave and the guy just kept asking me if I was looking at their website. Then when I finally got through to him that I was trying to order from a group purchase deal he told me to call another number (714-602-5741) So I called that number and the lady told me all the sales people were out to lunch. She took my name and number and said she would have someone call me. So I guess I am waiting for a phone call now.

Anyone else having problems placing an order?

code4
04-10-2007, 06:35 PM
My first attempt to place and order didn't go well. I called the number you gave and the guy just kept asking me if I was looking at their website. Then when I finally got through to him that I was trying to order from a group purchase deal he told me to call another number (714-602-5741) So I called that number and the lady told me all the sales people were out to lunch. She took my name and number and said she would have someone call me. So I guess I am waiting for a phone call now.

Anyone else having problems placing an order?

Yeah, same thing for me. I got my payment through alright at that 2nd #

Ask for Keven

HTH

SonofaBish
04-10-2007, 07:30 PM
I got through at the number in post 1 and they took my order... everythign worked for me

truckmann
04-10-2007, 07:50 PM
Talked to kevin and got my order in. He said he is waiting to get 5 more orders in and then he will start processing. :) I didn't ask how many he had so far, but I suspect he will have 5 more orders soon.

Derek @ EDO
04-10-2007, 08:08 PM
Ok guys, shipping will work in groups, There will be two shipments! When 25 people pay those 25 will be shipped out.
When the other 25 pay the other shipment will be sent out!
Let me know if this sounds good!
This way we dont have to wait for all 50 total to be paid for before shipping.

97rs4life
04-10-2007, 08:12 PM
Ok guys, shipping will work in groups, There will be two shipments! When 25 people pay those 25 will be shipped out.
When the other 25 pay the other shipment will be sent out!
Let me know if this sounds good!
This way we dont have to wait for all 50 total to be paid for before shipping.

hmm, sounds like people in the second batch could get screwed then if not all 50 pay up right away or pay for that matter. Not really a fan of that idea. Guess I will call them right away in the morning and hope that I make the first batch then

lynx853
04-10-2007, 09:38 PM
i dont get paid till friday, i hope thats ok!

Derek @ EDO
04-10-2007, 09:49 PM
would yall rather do it in batches of 20?
say the first 20 paid gets shipped then when the 2nd batch of 20 gets paid it will be shipped.
Then when the other 10 gets paid theirs will ship out.
Hows that sound?

jeffboy757
04-10-2007, 10:24 PM
take a closer look at my post number 190. blackk gauge. and yay i made it before 50 poeple came

Derek @ EDO
04-10-2007, 10:32 PM
just tell them what color when you place your order!

Derek @ EDO
04-10-2007, 10:33 PM
Just paid!

Cant wait!!!

jeffboy757
04-10-2007, 10:34 PM
oh that works too, so if you think about it, it dosent really matter what spot you are with the 1-50, its all about when you send payment. hopefully you can set up a shipment every 20 payments. that way i dont have to wait TOOO long.

Lurius
04-10-2007, 10:50 PM
Sent my payment along to them. Heres hoping for a fast shipment! I got a call today saying ym rods were shipping from TR today and that means I may build the motor as soon as this weekend, but likely mid next week! I cant wait! Im all giddy like a school girl!

-Lurius

Derek @ EDO
04-10-2007, 11:04 PM
batches of 20 it is then!
then of course the last 10!
Hopefully everyone on the list will pay ASAP, several members have already paid! Thanks BTW!

nope, it does not matter if your first or last on the list, When you get the payment in is what matters!

Kevin will be updating me on the list of members who have paid, When you call or whatever you can tell him what # you are on the list (he has the list) he will then hi-light your name and send it to me. He told me that he will try to send me the updated PAID list once a day before closing time. I will then update the list in the first post.

Thanks,
Derek

sidewayz28
04-10-2007, 11:05 PM
im going to call before i leave for school tommorow, are they west coast?

Derek @ EDO
04-10-2007, 11:06 PM
they have two locations one in CA and one in TX
The number in the first post is TX the number 714-602-5741 is CA.

sidewayz28
04-11-2007, 12:07 AM
so theyd know about the group purchase in CA aswell then right?

Derek @ EDO
04-11-2007, 01:15 AM
Yep, kevin is in CA

97rs4life
04-11-2007, 08:59 AM
whats the time difference over in CA from eastern time? Is it 4 hours?

sprayin'99ss
04-11-2007, 09:30 AM
Just payed up! Will you keep us posted on how many have paid so we know when to look for it in the mail! Thanks for the deal!

jknox
04-11-2007, 10:15 AM
Just payed through the Texas location! Guy I talked to said I was his 4th this morning! :)

97rs4life
04-11-2007, 10:37 AM
paid through the Texas location. Guy was a bit hard to understand, but got it taken care of

fastlt1
04-11-2007, 10:48 AM
So is this over is it too late? Has any of the group 3 got it yet?

steady01
04-11-2007, 10:54 AM
Use The Lm1 Best One Out

fastlt1
04-11-2007, 11:01 AM
Use The Lm1 Best One Out

The LC1 looks to have alot of problems.

97rs4life
04-11-2007, 11:05 AM
So is this over is it too late? Has any of the group 3 got it yet?

nope, we just started paying, give them a call with the phone number provided in the first post and get yourself a nice wideband ;)

Kingpimp
04-11-2007, 01:10 PM
Just paid at the TX location. Get those payments in guys so we can get the first shipment out soon.

97rs4life
04-11-2007, 01:12 PM
yea and if you are on the list, make sure to tell them your screenname. Guy had to call me back today to get my screenname because he and I forgot about that the first time around

sidewayz28
04-11-2007, 02:58 PM
Use The Lm1 Best One Out
your a dumbass, no one really cares what u think the best one is

BTW i paid today through kevin

stall speed
04-11-2007, 03:03 PM
Add me to the list for white face gauge for $225

lynx853
04-11-2007, 03:35 PM
ahh! friday can't come soon enough

1QUIKWS6
04-11-2007, 03:59 PM
So is this over is it too late? Has any of the group 3 got it yet?

nope, we just started paying, give them a call with the phone number provided in the first post and get yourself a nice wideband

So, don't you have to have your name on the list? I thought they asked you that question?

I want to get in on this also - sent a PM early today but if you are reading this:

Please add me to the list for a $225 Black Face Gauge

-Jay-

1QUIKWS6
04-11-2007, 04:17 PM
Well, on a long shot I just called Kevin and ordered my PLX without being on the list and it worked. Counting my payment there are 11 people paid so far according to Kevin.

So if you want to add my name to the list it is:

1QuikWS6 - $225 Gauge - Black Face - Paid

Hopefully this was alright - not stepping on any toes :)

Good news is, they are planning on running a GP on the other gage systems they sell in the near future :thumb:

Thanx to Derek for doing such a great job of facilitating this GP

97rs4life
04-11-2007, 05:08 PM
yea I dunno how many have been done over at the TX location but we are well on our way. No problem just calling and paying, that is good cuz I am sure some of the 50 listed wont pay

truckmann
04-11-2007, 05:37 PM
You don't have to be on the list. DLH posted a couple of days ago and said anyone is welcome to place an order now that we have reached 50 people on the list. So order away!

Johnny5
04-11-2007, 06:45 PM
Called too late tonight. I'll call them back tomorrow 9-6PM Central.

97rs4life
04-11-2007, 07:12 PM
Called too late tonight. I'll call them back tomorrow 9-6PM Central.

maybe try the CA one and see if they are open yet

Derek @ EDO
04-11-2007, 07:44 PM
Cool guys, first shipment is going to go out quickly if we keep this up!
I figured that some will not pay that are on the list (Hope they do) but since we are allowing people to call and place orders that arent on the list it shouldnt be a problem!

Guys we dont have a time limit on this GP!
I WANT EVERYONE who wants to get one at this price to do so!
we may keep it going for another 2 weeks or so, when the orders start to die down we will call it a done deal!


Like stated above just use the info on the first page to place your order!
just be sure to tell them that you would like to be added, this way they arent looking for your S/N on the list!
BTW they are pretty excited about the outcome so far,
that just shows how good this online community is!


Thanks again!

I will update the list with the people who have paid as soon as Kevin emails it to me.
hopefully he will get it out today! It sounds as if we are keeping them pretty busy!!!

truckmann
04-11-2007, 08:22 PM
maybe try the CA one and see if they are open yet
I made my order through CA at around 7:30 pm central time.