ls2 intake
03-13-2007, 10:14 AM
#1
12 Second Club
Thread Starter
Join Date: Jul 2006
Location: Ellicott City,MD
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
ls2 intake Well its time to upgrade the intake manifold, I was originally going to get an ls6 or fast but I am on a budget and was curious if anyone has expirence with an ls2 manifold and how they perform against the ls6 and fast on a fbody. I have a 2000 trans am w/ ram air, 3600 stall, 3.73's, LT,Cutout, and will be spraying between 75-150 shot, possibly a cam in the future. Any information is appreciated.
Kevin
Kevin
03-13-2007, 12:14 PM
#3
TECH Junkie
iTrader: (13)
Join Date: Sep 2004
Location: Fort Myers, FL.
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
If you go that route have soemone port it out when you put it on. I know Jeremy Formatto that lives down here (Tuner) in Florida ports them out for people doing what you want done and has had good results.
03-13-2007, 06:00 PM
#4
Teching In
iTrader: (3)
Join Date: Apr 2005
Location: nyc
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
sounds alsome thx for the advise,
Im not sure if I would port a 3mm piece of plastic tho, do the intake ports match up evenly to the heads? If not I can see wanting to reshape it somehow
once again this members s/n is 'tuner'?
Ill be sure to contact him
Im not sure if I would port a 3mm piece of plastic tho, do the intake ports match up evenly to the heads? If not I can see wanting to reshape it somehow
once again this members s/n is 'tuner'?
Ill be sure to contact him