how much gain
03-27-2007, 12:53 PM
#6
TECH Fanatic
iTrader: (17)
Join Date: Sep 2006
Location: dayton ohio
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
Im an A4 and when i was cam only iput down 350rwhp and seen most do aout 355-360 in an A4.I dont know whait will do in a6speed,but it will def.dyn more than a stalled A4
03-27-2007, 12:58 PM
#7
TECH Fanatic
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
405 with a good tune!!!, on a dynojet dyno...
and yes you will always notice a larger then stock cam, since they make more power per rpm, by allowing your engine to breath more...
and yes you will always notice a larger then stock cam, since they make more power per rpm, by allowing your engine to breath more...
Trending Topics
03-27-2007, 01:22 PM
#8
11Second Club
iTrader: (3)
Join Date: Dec 2004
Location: Dallas (Richardson), TX, USA
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
I think 405 is pretty inflated. I'd be looking for 370ish with that small of a cam. You'd definitely notice a nice torque gain, too. You'll absolutely notice it.
03-27-2007, 01:31 PM
#9
TECH Fanatic
iTrader: (7)
Join Date: Dec 2003
Location: Las Vegas, from Crystal Lake IL
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gauge
I think 405 is pretty inflated. I'd be looking for 370ish with that small of a cam. You'd definitely notice a nice torque gain, too. You'll absolutely notice it.
really I thought the 224/224 cams where turning higher numbers?
my mistake!
03-27-2007, 03:20 PM
#11
i put 408hp with tr224 plus dart heads and before the heads its put 369hp with mid tube headrs and few mods.
its the best street use cam i ever tried its powerfull plus streetable no regret at all.
its the best street use cam i ever tried its powerfull plus streetable no regret at all.
03-27-2007, 03:55 PM
#13
TECH Enthusiast
iTrader: (51)
Join Date: Apr 2006
Location: socal
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
I have a 112 lsa and i noticed a big power difference up top and lost a little down low. With the ported ls1 heads and cam it made a good amount of power difference but i would not expect to be over 415rwhp when i get a tune. When i get my new cam and heads i hope to be closer to 475.
03-27-2007, 09:05 PM
#15
TECH Resident
Thread Starter
iTrader: (10)
Join Date: Feb 2007
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
ok will it turn ovER a set of 315 from a roll and will i really notice a huge differance . I mean seat of the pants differance... i am just looking to gt pumped up here i am doing this all tommorow! will it sound mean as ****
03-28-2007, 11:24 PM
#19
12 Second Club
Join Date: Jul 2006
Location: Pittsburgh,PA
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
all depends on the tires.... with my custom ground cam (214/230), other mods in sig, and a tune....my 245's would roll over pretty good at anything below 45mph or so.