Quick question on pushrod length, need quick answer
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Mar 2004
Location: In your girl
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Quick question on pushrod length, need quick answer
First of all, thanks in advance for the help.
My buddy is intalling a GM ASA cam w/ specs 228/236 .525 .525 110 lsa, he is also installing stock unmilled 243 heads. Question is, are the stock 7.4 pushrods ok or does he need a different length. We have found a few diff. answers, some say stockers are fine, and one guy says we need to use a 7.425. I need a definitive answer please, looking to buy these today!
Once again, thanks!
My buddy is intalling a GM ASA cam w/ specs 228/236 .525 .525 110 lsa, he is also installing stock unmilled 243 heads. Question is, are the stock 7.4 pushrods ok or does he need a different length. We have found a few diff. answers, some say stockers are fine, and one guy says we need to use a 7.425. I need a definitive answer please, looking to buy these today!
Once again, thanks!