Lifter Question
#1
TECH Apprentice
Thread Starter
iTrader: (5)
Join Date: Apr 2006
Location: KC:K
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
Need to check Lifters
Hello,
IS there anty qway to check my lifter to seei f they have failed without taking the heads off the car. Could I pull the valley cover and check them that wayt or does the head completely bolt over the lifter itself.
Tilly
IS there anty qway to check my lifter to seei f they have failed without taking the heads off the car. Could I pull the valley cover and check them that wayt or does the head completely bolt over the lifter itself.
Tilly
Last edited by tilly; 04-07-2007 at 09:54 PM.
#3
TECH Enthusiast
iTrader: (40)
Join Date: Jan 2006
Location: Scottsboro, AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
There's really no good way to look at them and truly inspect them without pulling the heads.
I guess you could look down the PR hole in the heads, but that's not going to tell you anything.
I guess you could look down the PR hole in the heads, but that's not going to tell you anything.
#5
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Heads need to come off for anything lifter related pretty much. You could check for a completely collapsed lifter though by pulling the valve covers and push on the push rods and fell for a weak lifter.