441ci LS1, L92 heads, L76 intake...how much power/torque????
#1
441ci LS1, L92 heads, L76 intake...how much power/torque????
Hi all. New dude.
Have a fresh resleeved LS1 block 4.125 x 4.125.....441ci. All forged, Cola crank, Manley rods and Ross pistons. 11.5:1 cr. 244/244 .610/.610 114 lsa.
L92 heads are pretty much done (flowed 365cfm@650) and I'm gonna use an L76 intake. N/A only.
4L60E built tranny. 3.73 gears through a 12 bolt.
Any guess on RWHP/RWTQ?????? I was hoping for 600 RWHP.
Have a fresh resleeved LS1 block 4.125 x 4.125.....441ci. All forged, Cola crank, Manley rods and Ross pistons. 11.5:1 cr. 244/244 .610/.610 114 lsa.
L92 heads are pretty much done (flowed 365cfm@650) and I'm gonna use an L76 intake. N/A only.
4L60E built tranny. 3.73 gears through a 12 bolt.
Any guess on RWHP/RWTQ?????? I was hoping for 600 RWHP.
#4
TECH Regular
iTrader: (1)
Join Date: Jun 2005
Location: The Woodlands, TX
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
it does sound like a small cam for the motor. with the cam size, tranny, and gears it almost sounds like a cruiser, something to drive on the weekends to meets and such, but the motor is built really big for something like that.
what are the intentions for the car?
as for hp numbers...ill guesstimate 565-570-ish.
-cam
what are the intentions for the car?
as for hp numbers...ill guesstimate 565-570-ish.
-cam
#6
Originally Posted by wolfy
it does sound like a small cam for the motor. with the cam size, tranny, and gears it almost sounds like a cruiser, something to drive on the weekends to meets and such, but the motor is built really big for something like that.
what are the intentions for the car?
as for hp numbers...ill guesstimate 565-570-ish.
-cam
what are the intentions for the car?
as for hp numbers...ill guesstimate 565-570-ish.
-cam
Intentions...pure street car doing roll on races. Car is full wieght, A/C and all accessories.
Possible progressive controlled 200 DP shot later on.
#7
TECH Fanatic
iTrader: (1)
Guys, imagine pulling up next to this thing. That cam probably sounds like a 224 cam in a 346. Now imagine you're next to this mild sounding car that throws 550 - 570 to the rear wheels and how badly it would pull on a typical h/c 346 car thats putting only 420-450 to the wheels...
Trending Topics
#8
Originally Posted by hammertime
Guys, imagine pulling up next to this thing. That cam probably sounds like a 224 cam in a 346. Now imagine you're next to this mild sounding car that throws 550 - 570 to the rear wheels and how badly it would pull on a typical h/c 346 car thats putting only 420-450 to the wheels...
Than imagine it with a 200 progressive shot after its 10 cars out in front of you