Lythropus
04-09-2007, 01:38 PM
How many of your have hooked up this wire when you installed your lc-1? I'm running an LC-1 with dynotune gauge...
PCM Diagnostics & Tuning - LC-1 black calibration wire
View Full Version : LC-1 black calibration wire
Lythropus
04-12-2007, 12:24 AM
bump for an answer
98turbls1
04-12-2007, 01:04 AM
I hooked mine up...Honestly anything that tells you what's going on inside of the controller is a good thing...It's not hard... =)
joecar
04-12-2007, 03:32 PM
Yep.
Serves 2 purposes:
a. drives the LED so you can see what the LC-1 is doing.
b. allows you to initiate free air calibration using the pushbutton.
Serves 2 purposes:
a. drives the LED so you can see what the LC-1 is doing.
b. allows you to initiate free air calibration using the pushbutton.