Cam
04-09-2007, 10:17 PM
#1
Teching In
Thread Starter
Join Date: Mar 2007
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Cam I have a 99 zz8 with a stock ls1 and its automatic... i dont really kno the specs and was wondering what a MS3 camshaft "TSP XS Series Camshaft:
Magic Stick V.3 237/242 .603/.609 with a 112 degree lsa" any comments if thats good...and if anyone wants to help who has alot of knowledge about cams for ls1's i have msn if theyd like to talk on there
Magic Stick V.3 237/242 .603/.609 with a 112 degree lsa" any comments if thats good...and if anyone wants to help who has alot of knowledge about cams for ls1's i have msn if theyd like to talk on there
04-09-2007, 10:33 PM
#2
TECH Fanatic
iTrader: (1)
Join Date: Nov 2005
Location: Goldsboro, NC
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
First thing first. Your motor has to breathe. Headers, Exhaust, Intake. I know you said stock, but how stock is it? That is a pretty decent sized Cam. I have the MS4, and a buddy of mine has the MS3. Both nice cams, but you'll need all the supporting mods to go with it.
04-10-2007, 09:53 AM
#4
do all bolt ons, stall, and gears and then go cam.... make sure the cam comes after those otherwise you wont get all out of that cam and with the stall i wouldnt go anything smaller than 3800.
04-10-2007, 10:07 AM
#5
TECH Apprentice
iTrader: (8)
Join Date: Jun 2005
Location: Oak LAwn, IL
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
i just got my ms3 installed and love it. i have a 3500 stall right now but im going up to a 4000 just to get that power. but all and all im so happy with my cam choice.
04-10-2007, 11:19 AM
#6
Teching In
Thread Starter
Join Date: Mar 2007
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
niiiiCE Ya Thanks For The Advice Beacause My Friend Just Put A Cam In And He Figured He Woulda Been Better Off Doing Rear End First Cuz I Dont Wanna Jump To Fast.....but That Sounds Like A Good Route To Take