224/228 XE-R cam
12-14-2002, 09:56 AM
#5
Re: 224/228 XE-R cam Sent you mail!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
12-14-2002, 10:32 AM
#6
Re: 224/228 XE-R cam Why run a higher LSA with a M6?
This is for racing,not tooling around on the street.
I want mad power between 4000-6500.
Jason-I got your e-mail,could you send me dyno graphs comparing the 2 cams?
or post them on here?
Thanks,
Sean
This is for racing,not tooling around on the street.
I want mad power between 4000-6500.
Jason-I got your e-mail,could you send me dyno graphs comparing the 2 cams?
or post them on here?
Thanks,
Sean
Trending Topics
12-14-2002, 01:26 PM
#8
Re: 224/228 XE-R cam </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 01-Z:
<strong>
This is for racing,not tooling around on the street.
I want mad power between 4000-6500.
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Then get more cam.
228/228 112 +2
230/230 112 +3
<strong>
This is for racing,not tooling around on the street.
I want mad power between 4000-6500.
</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Then get more cam.
228/228 112 +2
230/230 112 +3
12-14-2002, 02:17 PM
#9
Re: 224/228 XE-R cam I'm considering 228ish.
I might do a custom grind 228/232.
I would like a minor split because I plan on running nitrous.
I still haven't been able to get good,definetive answers.
They are all pretty vague.
Some people say you don't need 580ish lift to make good power,
other people say you do. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Simply stated-I want the most powerful cam for drag racing.
I might do a custom grind 228/232.
I would like a minor split because I plan on running nitrous.
I still haven't been able to get good,definetive answers.
They are all pretty vague.
Some people say you don't need 580ish lift to make good power,
other people say you do. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Simply stated-I want the most powerful cam for drag racing.
12-14-2002, 03:12 PM
#10
Re: 224/228 XE-R cam You don't need the 580 lift compared to 565, but the faster ramps probably add a couple HP and make having a big cam much more livable.
I wouldn't worry about the split pattern unless you will be spraying more than 150 shot on a regular basis.
I wouldn't worry about the split pattern unless you will be spraying more than 150 shot on a regular basis.
