Will 918's work?
12-21-2002, 11:34 PM
#1
Will 918's work? I'm installing 2.02/1.60 valves in a 02 LS6 Head.The Cam is a TR 224 on 112.
Here is the plan
1- Just run 918's
or
2- Run 918's and an ARE rev kit that puts springs on the lifters.
What do you think will be good for my setup?
Here is the plan
1- Just run 918's
or
2- Run 918's and an ARE rev kit that puts springs on the lifters.
What do you think will be good for my setup?
12-22-2002, 09:59 AM
#3
TECH Fanatic
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge
Posts: 1,894
Likes: 0
Received 0 Likes
on
0 Posts
Re: Will 918's work? I agree the 918 should be fine and I would also recommend the titanium retainers as well. There should be no need for a REV kit.
<small>[ December 22, 2002, 10:01 AM: Message edited by: Paul @ Thunder ]</small>
<small>[ December 22, 2002, 10:01 AM: Message edited by: Paul @ Thunder ]</small>