Lt1junkie

iTrader: (9)

Hey it just occured to me in my build since i have a 94 lt1 and i am converting to the pin driven cam and vented opti, 95-97 my timing cover is not going to work! So i need to know if any of you out there have a extra timing cover laying around 95-97 if so just let me know and i will buy it from ya thanks again

94 F-body

iTrader: (1)

do you have a pic of your timming cover that does not work with your set up?

Lt1junkie

iTrader: (9)

sure don't it is actually on my current motor. and am building the other motor out of a new block

dhdenney

iTrader: (53)

His timing cover that won't work has the small hole in the center and the one he wants has the big hole in the center for the new opti. The pic I have here is what he's got.

Paul Bell

iTrader: (9)

http://cgi.ebay.com/ebaymotors/ws/eB...m=230114689241

This one DOES NOT have the crank sensor fitting, in case you need it.

These covers can still be obtained from GM, any parts guy can get the numbers.

dhdenney

iTrader: (53)

Yeah the above looks like an OBD1 vented cover which the original poster would need.