Blown LT1 dyno results...
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Utah
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Blown LT1 dyno results...
My car made 423hp and 406tq with a P1SC@8psi and the small twin intercoolers.
I was wondering how much power i'm leaving on the table with an unlocked 3000 stall converter. Does anybody know?
I'll post up the dyno sheet later.
I was wondering how much power i'm leaving on the table with an unlocked 3000 stall converter. Does anybody know?
I'll post up the dyno sheet later.
Trending Topics
#8
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Utah
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys! As far as other mods, its a 355 with 8.75:1cr, ported LT4 heads and intake, mild blower cam, stock tb, Pacesetter lt's, loud mouth, 3000 stall, tubular k member and upper/lower a-arms, qa1 shocks and springs in front and qa1 shocks in back. whew, I think thats all.
The dyno operator did say it looks like my fuel pump isn't flowing enough up top so it looks like i'll be upgrading that too.
Hopefully i'll have some track times in a few weeks!
The dyno operator did say it looks like my fuel pump isn't flowing enough up top so it looks like i'll be upgrading that too.
Hopefully i'll have some track times in a few weeks!
#10
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2005
Location: Utah
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
Its a custom converter by a local shop. Originally I was going with a B&M but they sent me two bad ones and pretty much screwed me out of 3 grand so I just had these guys do it.