Smoked corners
04-27-2007, 08:18 PM
#4
TECH Regular
iTrader: (1)
Join Date: May 2006
Location: Chantilly, VA
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Just sand down the stockers with very fine sand paper and spray the VHT Niteshades on. then spray a clear coat and buff it to a shine. Real easy and looks amazing.
Jason
Jason
04-27-2007, 08:59 PM
#6
TECH Regular
iTrader: (1)
Join Date: May 2006
Location: Chantilly, VA
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
I dont have any good ones of my car but here is a members...
http://xomixx.com/archive/fta/mods.html
hope that helps!
Jason
http://xomixx.com/archive/fta/mods.html
hope that helps!
Jason
Trending Topics
04-27-2007, 09:17 PM
#8
TECH Regular
iTrader: (1)
Join Date: May 2006
Location: Chantilly, VA
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/paint-body-work/447719-vht-nite-shades-write-up-installation-preparation.html
That should work for ya! Its what I used and was perfect! Just read the directions on the can when you get it and follow that thread and you should be SET! Good luck!
Jason
That should work for ya! Its what I used and was perfect! Just read the directions on the can when you get it and follow that thread and you should be SET! Good luck!
Jason
