my01ws6

iTrader: (16)

Ok well I got the niteshade on to the color I like....now I need to know if I polish or wetsand it before I add clear to it??

LT1wannabe

iTrader: (2)

I'd help, but I haven't done it before. There's a huge sticky about it on this forum. That should help.

BlackHawk T/A

iTrader: (3)

Refer to the thread you already made here:

https://ls1tech.com/forums/paint-body-work/708897-vht-nightshade-help.html

lomaximumta

iTrader: (5)

I'm in the middle of doing my corners right now. I just wet sanded the lenses with 600 grit until they were totally smooth and then applied the night shade. Then after about 5 hours I put a coat of clear.

BlackHawk T/A

iTrader: (3)

You don't have to smooth the piece before you put the nightshade on.

lomaximumta

iTrader: (5)

It looks hella better if you do!

LILWS6

to answer your question i didn't clear mine when i got the color i wanted i wet sanded with 2000 grit and then polished by hand heres some pics i've done it with all my marker lights. ohh yea and i agree it looks better when you smooth the side markers no nasty lettering showing with the tint.

Mistacamawo

with nightshades it can be tricky because you have to get it right the first time. Getting it off if you mess up sucks.

my01ws6

iTrader: (16)

well I wish I would have took off the letters...but i cant now....all the turn signals have already been painted and cleared...